{"product_id":"abb-namc-11c-control-board-module","title":"ABB NAMC-11C Control Board Module","description":"\u003cp\u003eConfigured for high-speed digital signal processing and real-time motor control in ABB ACS600 drive systems, the \u003cstrong\u003eABB NAMC-11C 3BSE017194R1\u003c\/strong\u003e (\u003cstrong\u003eNAMC-11C\u003c\/strong\u003e Control Board Module) provides direct physical\/electrical execution. Operating on a nominal supply voltage of 24 VDC, the board handles synchronous digital input\/output tasks and control logic operations to ensure precise drive execution.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNAMC-11C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSweden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 to 0.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e21 cm x 6.7 cm x 2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-25 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5 to 15 W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e3BSE017194R1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctions\u003c\/td\u003e\n\u003ctd\u003eDigital input\/output processing, control logic, communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDrive Backplane Integration and Industrial Network Determinism\u003c\/h3\u003e\n\u003cp\u003eThe ABB NAMC-11C connects directly to the drive backplane bus, supporting rapid instruction processing and maintaining backplane bus communication velocity across high-density I\/O channels. Designed for integration into Profinet and EtherNet\/IP deterministic networks, the module executes synchronous signal routines without adding cycle latency to primary motor control loops. Full firmware flash compatibility ensures seamless system updates and reliable parameter synchronization with central controller processors.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the maximum allowable ambient temperature range for operating the NAMC-11C board?\u003c\/p\u003e\n\u003cp\u003eA: The NAMC-11C is specified to operate reliably in ambient temperatures ranging from -25 to +70 deg C under non-condensing relative humidity conditions (5% to 95% RH).\u003c\/p\u003e\n\u003cp\u003eQ: Can the NAMC-11C module be hot-swapped while the ACS600 drive power stage is operational?\u003c\/p\u003e\n\u003cp\u003eA: No. Standard drive control board installation rules require the main AC line supply and external 24 VDC auxiliary power feeds to be fully isolated before inserting or removing the NAMC-11C card to avoid transient voltage damage to the edge connector logic.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower Isolation: Disconnect all incoming AC mains and auxiliary 24 VDC power sources to the drive enclosure before opening the maintenance panel.\u003c\/li\u003e\n\u003cli\u003eElectrostatic Discharge (ESD) Measures: Wear a grounded ESD wrist strap connected to the metal chassis of the drive cabinet when handling the NAMC-11C circuit assembly.\u003c\/li\u003e\n\u003cli\u003eMechanical Alignment: Carefully align the module edge connector with the designated slot inside the ACS600 chassis. Gently push the board into place until seated firmly, and secure all mounting screws to ensure proper grounding.\u003c\/li\u003e\n\u003cli\u003eSignal Cable Clearance: Route low-voltage digital I\/O lines and communication cables away from high-current AC output leads to minimize electromagnetic noise coupling.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":45378173665395,"sku":"NAMC-11C","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/NAMC-11C_1500x1500_b7a2b522-3b7c-44b5-96ef-39e72b80b46b.jpg?v=1787209636","url":"https:\/\/www.dcssupplier.com\/ar\/products\/abb-namc-11c-control-board-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}