{"product_id":"allen-bradley-2090-xb33-16-resistive-brake-module","title":"Allen-Bradley 2090-XB33-16 Resistive Brake Module","description":"\u003cp\u003eThe \u003cstrong\u003e2090-XB33-16\u003c\/strong\u003e is a Bulletin 2090 resistive brake module (RBM) engineered for motion control drive systems operating at 230 V or 460 V AC. It provides electro-mechanical isolation by physically and electrically disconnecting the drive power output from the motor while dissipating regenerative motor energy through an internal 16 Ohm resistive load. Designed for rapid emergency stopping and enhanced motion safety, the module features an internal safety contactor rated for a 33 A peak zero-to-peak current limit.\u003c\/p\u003e\n\u003ch3\u003eFunctional Operation \u0026amp; Interface Signal Flow\u003c\/h3\u003e\n\u003cp\u003eThe resistive brake module establishes a controlled stopping mechanism that acts independently of active drive commands. Under normal operating conditions, the internal contactor passes motor current from the servo drive directly to the motor phases. When a fault or safety stop is commanded, the internal contactor transfers the motor windings to the internal 16 Ohm brake resistor network, converting rotational kinetic energy into thermal dissipation.\u003c\/p\u003e\n\u003cp\u003eSystem connectivity is managed through dedicated terminal blocks: TB1 connects to the servo drive output, TB2 links directly to the motor leads, and TB3 handles safety control I\/O signals. Auxiliary status contacts wired through TB3 report the physical state of the internal contactor back to external safety circuits.\u003c\/p\u003e\n\u003ch3\u003eThermal Management \u0026amp; Mounting Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnergy dissipation within the internal resistor generates heat during braking cycles. The module is designed to execute resistive braking up to once per minute under specified inertia mismatch conditions. Installation requires mounting to a painted-free, zinc-plated steel subpanel to ensure optimal high-frequency grounding and noise suppression.\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e2090-XB33-16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eResistive Brake Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eBulletin 2090\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e16 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Drive Current (0-pk)\u003c\/td\u003e\n\u003ctd\u003e33 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Drive Current (RMS)\u003c\/td\u003e\n\u003ctd\u003e23 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e230 V AC \/ 460 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Operating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 deg C (32 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Operating Temperature\u003c\/td\u003e\n\u003ctd\u003e50 deg C (122 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Altitude\u003c\/td\u003e\n\u003ctd\u003eUp to 1500 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.00 lbs (3.18 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eEnsure main power to the servo drive is completely removed and DC bus capacitors have discharged for at least five minutes prior to connecting or servicing power cabling. Signal and power cables must maintain proper separation, and shield grounding clamps must be secured to the chassis panel to reduce electromagnetic interference (EMI).\u003c\/p\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003eQ: How does the 2090-XB33-16 interface with external machine safety safety circuits?A: The module provides auxiliary contact outputs on terminal block TB3 that reflect the physical state of the internal contactor, allowing integration into user-designed safety monitoring loops.\u003c\/p\u003e\n\u003cp\u003eQ: What is the maximum permitted braking duty cycle for this module? A: The module is rated to resistively brake a matched motor and load inertia up to once per minute to prevent thermal overload of the internal resistors.\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":67092030292083,"sku":"2090-XB33-16","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/2094-AMP5-S2_Cocoai.jpg?v=1793609837","url":"https:\/\/www.dcssupplier.com\/ar\/products\/allen-bradley-2090-xb33-16-resistive-brake-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}