{"product_id":"emerson-epro-pr6424-010-130-eddy-current-proximity-probe","title":"Emerson EPRO PR6424\/010-130 Eddy Current Proximity Probe","description":"\u003cp\u003eThe \u003cstrong\u003eEmerson EPRO PR6424\/010-130\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003ePR6424\u003c\/strong\u003e Eddy Current Proximity Probe, operates as a dedicated hardware component for high-resolution shaft vibration and displacement measurement within turbine systems, compressors, pumps, and gearbox assemblies.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Model (PR6424)\u003c\/strong\u003e: Compact 5 mm eddy current displacement and proximity sensing probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuffix (\/010-130)\u003c\/strong\u003e: Designates the mechanical housing thread configuration, integrated 1-meter shielded cable, and factory calibration tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePR6424\/010-130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson \/ EPRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eProbe Diameter 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 deg C to +180 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive sensor (Driven by CON011\/CON021 signal converter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Type\u003c\/td\u003e\n\u003ctd\u003eEddy Current Displacement \/ Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003eLinear range approx. 1.2 mm (System dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003eApprox. 8 V\/mm (When paired with CON011\/CON021)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinearity Error\u003c\/td\u003e\n\u003ctd\u003e+\/- 0.025 mm within calibrated range (0-45 deg C reference)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Shaft Diameter\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;= 15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget Material\u003c\/td\u003e\n\u003ctd\u003eFerromagnetic steel (AISI 4140 \/ 42CrMo4 or equivalent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP66 (IEC 60529 compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eStainless steel, hermetically sealed body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol \u0026amp; System Signal Conditioning\u003c\/h3\u003e\n\u003cp\u003eWhen integrated with CON011 or CON021 signal converters, raw eddy-current signals convert into standardized process monitoring signals, supporting direct interface to DCS analog input channels or 4-20 mA HART loop protocol transmitters. Channel-to-channel isolation within the monitoring system prevents ground loop currents from distorting the proportional displacement output across dynamic shaft expansion cycles.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What signal converters must be paired with the PR6424\/010-130 probe? A: The probe is designed for matched integration with EPRO CON011 or CON021 signal converters.\u003c\/p\u003e\n\u003cp\u003eQ: Can the probe operate directly on target materials other than ferromagnetic steel? A: The factory calibration and linear measurement performance are specified for ferromagnetic steel (AISI 4140 \/ 42CrMo4); non-magnetic targets require system recalibration.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure a minimum of 5 full threads of engagement when screwing the probe body into tapped mounting brackets or machine casing ports.\u003c\/li\u003e\n\u003cli\u003eRoute the integrated shielded cable through grounded metal conduit, away from high-voltage motor conductors and variable frequency drive (VFD) output wiring.\u003c\/li\u003e\n\u003cli\u003eConnect cable shielding to ground at a single termination point (typically the cabinet barrier or rack terminal) to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003eVerify the physical nominal installation air gap of approximately 0.5 mm using a feeler gauge or DC gap voltage measurement prior to operation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Emerson Epro","offers":[{"title":"Default Title","offer_id":45380814340211,"sku":"PR6424\/010-130","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/PR9268301-100_3.png?v=1787278970","url":"https:\/\/www.dcssupplier.com\/ar\/products\/emerson-epro-pr6424-010-130-eddy-current-proximity-probe","provider":"DcsSupplier Limited","version":"1.0","type":"link"}