{"product_id":"epro-con021-913-040-signal-converters","title":"EPRO CON021\/913\/040 Signal Converters","description":"\u003cp\u003eConfigured for shaft displacement, axial position, eccentricity, and speed\/key monitoring in turbomachinery protection systems, the \u003cstrong\u003eEmerson CON021\/913\/040\u003c\/strong\u003e (\u003cstrong\u003eCON021\u003c\/strong\u003e Eddy Current Signal Converter) provides direct physical\/electrical execution. The hardware conditions raw proximity transducer signals across a dynamic frequency range of 0 to 20 kHz (-3 dB) with a rise time of under 15 us.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCON021\/913\/040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson \/ EPRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGERMANY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.22 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e16 x 16 x 12 cm (packaged unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-30 deg C to +100 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e3.5 W at nominal supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Sensors\u003c\/td\u003e\n\u003ctd\u003ePR6422, PR6423, PR6424, PR6425 (extended range), PR6426, PR6453\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasuring Range\u003c\/td\u003e\n\u003ctd\u003ePR6423: 4.0 mm (Extended Range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinearity Error\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;= 2.0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e-23 VDC to -32 VDC (Output: -4 VDC to -20 VDC) \/ -21 VDC to -32 VDC (Output: -2 VDC to -18 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy LMgSi 0.5 F22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003ePanel mount, 4 x M5x20 screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eSelf-locking LEMO plug or screw terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock \u0026amp; Vibration\u003c\/td\u003e\n\u003ctd\u003e5g at 60 Hz at 25 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol and DCS Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe CON021\/913\/040 incorporates high-speed active conversion circuits engineered to interface directly with 4-20 mA HART loop protocol architectures and DCS networks, including Emerson DeltaV and Ovation platforms. Integrated channel-to-channel isolation prevents ground loop currents and cross-talk interference between adjacent proximity transducer input channels. Active signal logic conditions high-frequency eddy-current probe voltage changes into configurable analog outputs while maintaining a linearity error of \u0026lt;= 2.0%. Internal thermal drift compensation guarantees signal integrity across the full operating range from -30 deg C to +100 deg C.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How is the transducer input connected to the CON021\/913\/040 signal converter?\u003c\/p\u003e\n\u003cp\u003eA: Transducer input wiring attaches via a self-locking LEMO plug interface, while supply voltage and output signals terminate through screw terminal connections.\u003c\/p\u003e\n\u003cp\u003eQ: Which power supply input options determine the analog output voltage range?\u003c\/p\u003e\n\u003cp\u003eA: A supply input of -23 VDC to -32 VDC yields an output span of -4 VDC to -20 VDC, whereas a supply input of -21 VDC to -32 VDC produces an output span of -2 VDC to -18 VDC.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePanel-mount the aluminum alloy LMgSi 0.5 F22 housing using the four M5x20 screws into an IP-rated enclosure.\u003c\/li\u003e\n\u003cli\u003eAlign and press the transducer cable connector into the self-locking LEMO socket until the locking mechanism engages.\u003c\/li\u003e\n\u003cli\u003eRoute transducer and output wiring in dedicated, grounded metallic conduits separate from high-voltage AC conductors.\u003c\/li\u003e\n\u003cli\u003eTerminate signal cable shielding exclusively at the single-point cabinet instrument earth ground bus bar.\u003c\/li\u003e\n\u003cli\u003eVerify power supply polarity and negative DC input voltage levels before applying power to the terminal blocks.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Emerson Epro","offers":[{"title":"Default Title","offer_id":45499183530099,"sku":"CON021\/913\/040","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/PR9376-010-011_3_c1e52529-3c18-4e15-9b0d-83e528815b70.png?v=1789454677","url":"https:\/\/www.dcssupplier.com\/ar\/products\/epro-con021-913-040-signal-converters","provider":"DcsSupplier Limited","version":"1.0","type":"link"}