{"product_id":"honeywell-51304920-100-serial-interface-module","title":"Honeywell 51304920-100 Serial Interface Module","description":"\u003cp\u003eConfigured for serial data exchange in TDC3000 environments, the \u003cstrong\u003eHoneywell 51304920-100\u003c\/strong\u003e (\u003cstrong\u003e51304920-100\u003c\/strong\u003e Serial Interface Module) provides direct physical\/electrical execution of RS-232 and RS-485 communication protocols.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51304920-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e216 mm x 160 mm x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem backplane dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorts\u003c\/td\u003e\n\u003ctd\u003eRS-232, RS-485\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Connectivity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART loop protocol:\u003c\/strong\u003e The module supports transparent data pass-through for HART-enabled field instrumentation, ensuring that device-level diagnostic variables are correctly mapped within the TDC3000 control logic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity:\u003c\/strong\u003e The interface architecture facilitates deterministic protocol bridging, allowing serial-based field sensors to integrate into broader process control network segments without introducing latency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-channel isolation:\u003c\/strong\u003e Communication interfaces utilize galvanic decoupling to protect the TDC3000 backplane from ground-loop interference and common-mode noise generated by long-run serial cabling in industrial zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold junction compensation (CJC):\u003c\/strong\u003e The onboard signal processing circuitry maintains stability for serial bit-stream timing, preventing transmission errors caused by thermal drift within the cabinet environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this module support hot-swapping within the TDC3000 rack?\u003c\/p\u003e\n\u003cp\u003eA: Hot-swapping capability is restricted to specific backplane revisions. Consult the TDC3000 hardware installation manual to confirm if the host rack supports live module replacement without interrupting the control bus.\u003c\/p\u003e\n\u003cp\u003eQ: Can the RS-485 port be configured for multi-drop network topologies?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the RS-485 interface is designed for multi-drop serial configurations. Ensure correct termination resistors (typically 120 Ohms) are applied at both ends of the physical segment to maintain signal integrity and prevent reflections.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Secure the module into the designated rack slot or panel mounting position. Use the provided fasteners to ensure the metal enclosure maintains physical contact with the cabinet chassis for proper EMI shielding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Bond the module chassis to the central protective earth (PE) bus. A low-impedance ground path is required to maintain the effectiveness of the galvanic isolation barriers and for electromagnetic immunity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Terminate serial cables using shielded twisted-pair conductors. Keep communication lines separated from high-voltage AC or inductive load power conduits by at least 150 mm to minimize electromagnetic coupling and ensure bit-error-free serial transmission.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45223182565491,"sku":"51304920-100","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-06-29_14-13-40_ed4fdef5-6adb-41d6-9985-07167f9a1d4d.png?v=1783914976","url":"https:\/\/www.dcssupplier.com\/ar\/products\/honeywell-51304920-100-serial-interface-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}