{"product_id":"honeywell-51305387-300-cable-assembly","title":"Honeywell 51305387-300 Cable Assembly","description":"\u003cp\u003eConfigured for signal routing in data network architectures, the \u003cstrong\u003eHoneywell 51305387-300\u003c\/strong\u003e (\u003cstrong\u003e51305387-300\u003c\/strong\u003e) Cable serves as the primary interconnect component utilized to execute data signal transmission across DCS and control network platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51305387-300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.50 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e66 inch length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore Performance\u003c\/td\u003e\n\u003ctd\u003eShielded data signal routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHoneywell DCS Process Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART loop protocol:\u003c\/strong\u003e The cable construction ensures low capacitance and minimal signal attenuation for analog loops. This is mandatory for maintaining the HART diagnostic overlay integrity over the 66-inch connection span.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity:\u003c\/strong\u003e The physical cabling is engineered for the impedance requirements of high-speed fieldbus networks. This connectivity is mandatory to prevent signal reflections that could lead to packet loss or communication timeouts on the fieldbus segment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-channel isolation:\u003c\/strong\u003e The internal shielding of the 51305387-300 provides the necessary EMI\/RFI protection to prevent crosstalk between adjacent signal pairs. This is mandatory when routing multiple high-density data signals within restricted conduit or cabinet spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold junction compensation (CJC):\u003c\/strong\u003e The cable is designed to operate within the thermal specifications of the cabinet environment, ensuring that it does not introduce localized heating or signal drift that could affect the reference accuracy of attached thermocouple or RTD measurement modules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 51305387-300 cable be cut and spliced to fit specific field requirements?\u003c\/p\u003e\n\u003cp\u003eA: Cutting and splicing are strongly discouraged. Any disruption of the cable's factory-terminated shielding and impedance-matched geometry will degrade its high-frequency signal performance and increase susceptibility to electromagnetic noise.\u003c\/p\u003e\n\u003cp\u003eQ: Is this cable rated for use in intrinsically safe (IS) circuits?\u003c\/p\u003e\n\u003cp\u003eA: Suitability for IS circuits depends on the specific Honeywell system installation manual. Always cross-reference the cable's physical characteristics with the control system's entity parameters before installation in hazardous locations.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Support the cable along its 66-inch length using appropriate cable ties or trays to prevent mechanical strain on the terminations. Proper strain relief is mandatory to prevent terminal fatigue and intermittent data signal connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Terminate the cable shield to the cabinet’s designated instrument earth bus. A low-impedance connection is mandatory to provide an effective path for induced noise and to maintain the specified electromagnetic compatibility of the network link.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Maintain a minimum separation of 150 mm from high-voltage AC power cabling. This physical isolation is mandatory to prevent inductive coupling and high-frequency noise injection into the data signals, which is critical for protecting the DCS network communication integrity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45192087470195,"sku":"51305387-300","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-09_11-08-11_acc4a7c3-8743-42f0-bf74-1c20ed8a6f26.png?v=1783576158","url":"https:\/\/www.dcssupplier.com\/ar\/products\/honeywell-51305387-300-cable-assembly","provider":"DcsSupplier Limited","version":"1.0","type":"link"}