{"product_id":"honeywell-51305489-600-communication-cable-assembly","title":"Honeywell 51305489-600 Communication Cable Assembly","description":"\u003cp\u003eConfigured for high-reliability signal routing in Experion PKS and TDC 3000 control architectures, the \u003cstrong\u003eHoneywell 51305489-600\u003c\/strong\u003e (\u003cstrong\u003e51305489-600\u003c\/strong\u003e) Cable Assembly provides direct physical\/electrical execution of shielded data transmission, proprietary terminal connection, and backplane-to-module signal bridging.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51305489-600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1-3 m (configurable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eExperion PKS, TDC 3000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHoneywell DCS Process Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART loop protocol:\u003c\/strong\u003e The cable assembly utilizes shielded twisted pair (STP) geometry to preserve the impedance characteristics required for HART communication. This is mandatory to decouple analog control signals from external electromagnetic interference (EMI) that could otherwise distort the HART diagnostic overlay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity:\u003c\/strong\u003e The assembly ensures low signal attenuation across the 1-3 meter span. This is mandatory to maintain the strict signal-to-noise requirements of deterministic digital bus architectures, preventing data retransmissions or network segment timeouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-channel isolation:\u003c\/strong\u003e The design incorporates high-integrity shielding that mitigates capacitive coupling between adjacent signal runs. This is mandatory when routing high-density control cables within common industrial cable trays, preventing crosstalk that can manifest as erroneous process measurements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold junction compensation (CJC):\u003c\/strong\u003e While the cable is a passive interconnect, its materials are specified to operate within the thermal envelope of the DCS cabinet. This ensures that the cable does not induce thermal gradients that would degrade the reference accuracy of precision thermocouple and RTD input modules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this cable assembly be used in high-vibration industrial zones?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The proprietary industrial-grade connectors are designed with locking mechanisms that maintain physical contact integrity despite mechanical vibration. However, ensure that appropriate strain relief is applied at both ends to prevent stress on the connector housing.\u003c\/p\u003e\n\u003cp\u003eQ: Is the 51305489-600 compatible with non-Honeywell control hardware?\u003c\/p\u003e\n\u003cp\u003eA: No. The assembly utilizes Honeywell proprietary connectors specifically engineered for Experion PKS and TDC 3000 backplanes. Attempting to adapt these to other systems is not supported and can result in physical damage to the module pins or electrical shorts.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Support the cable using appropriate cable management hardware to maintain a bend radius consistent with the cable’s STP construction. Tight bends are mandatory to avoid to minimize impedance discontinuities that lead to signal reflections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Terminate the cable shield to the dedicated cabinet instrumentation ground bar. A low-impedance connection is mandatory to ensure the efficacy of the EMI mitigation and to provide a return path for high-frequency noise induced on the shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Maintain at least 150 mm of physical separation from high-power AC output conduits. This isolation is mandatory to prevent inductive coupling, which is critical for preserving the signal-to-noise ratio required by the DCS for deterministic data processing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45192087502963,"sku":"51305489-60005489-600","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-09_13-37-58_abb0dd79-e3dc-46c2-9f38-4f471a2a2574.png?v=1783576168","url":"https:\/\/www.dcssupplier.com\/ar\/products\/honeywell-51305489-600-communication-cable-assembly","provider":"DcsSupplier Limited","version":"1.0","type":"link"}