{"product_id":"honeywell-51306356-100-dcs-communication-cable","title":"Honeywell 51306356-100 DCS Communication Cable","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell 51306356-100\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e51306356\u003c\/strong\u003e communication cable, operates as a dedicated hardware component for low-voltage data and control signal transmission within Honeywell Distributed Control Systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51306356-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eBatch dependent (length-specific)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eLength-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eRated for typical DCS operating ranges (0 to 60 deg C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (none)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eShielded low-voltage communication cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Category\u003c\/td\u003e\n\u003ctd\u003eLow-voltage control and data communication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShielding Design\u003c\/td\u003e\n\u003ctd\u003eFoil and braided EMI\/RFI suppression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Jacket\u003c\/td\u003e\n\u003ctd\u003eIndustrial polymer (abrasion, oil, and chemical resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDCS Communication \u0026amp; Loop Integrity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFieldbus and HART Compatibility:\u003c\/strong\u003e Engineered to transmit digital and analog signal formats with minimal impedance degradation. The electrical characteristics match requirements for both 4-20 mA HART loop protocol configurations and high-speed industrial networks, including FOUNDATION Fieldbus or Profibus PA communication paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectromagnetic Shielding:\u003c\/strong\u003e Utilizes a structured foil and braided shield matrix to suppress high-frequency electromagnetic interference (EMI) and radio frequency interference (RFI). This layout preserves channel-to-channel isolation metrics within densely packed control cabinets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 51306356-100 cable support hot-swapping of connected I\/O modules?\u003c\/p\u003e\n\u003cp\u003eA: Yes. Being a passive physical layer component, the cable itself does not restrict the hot-swap capabilities of connected active modules. However, engineers must follow the system-level hot-swap safety protocols of the active Honeywell DCS controller.\u003c\/p\u003e\n\u003cp\u003eQ: How does the shielding layout prevent signal interference in high-current cabinet environments?\u003c\/p\u003e\n\u003cp\u003eA: The integrated foil and braid shield intercepts ambient electrical noise and drains it safely to the system ground. This shielding protects low-voltage data packages from inductive coupling caused by nearby high-current AC power cables.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Radius Limits:\u003c\/strong\u003e Maintain a minimum physical bend radius of 10 times the outer cable diameter during cabinet routing to prevent micro-fractures in the internal conductors and shield layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Point Grounding:\u003c\/strong\u003e Ensure the cable shield drain wire is grounded at a single end (typically at the DCS cabinet ground bar) to prevent the formation of ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConduit Separation:\u003c\/strong\u003e Always route these low-voltage communication cables in separate conduits or dedicated trays, isolated from high-voltage motor control and power distribution wiring.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45246879498355,"sku":"51306356-100","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-16_15-52-42_1e824cfe-f187-4525-b38c-f723ca0456c6.png?v=1784193601","url":"https:\/\/www.dcssupplier.com\/ar\/products\/honeywell-51306356-100-dcs-communication-cable","provider":"DcsSupplier Limited","version":"1.0","type":"link"}