{"product_id":"honeywell-51401952-100-printed-circuit-board-assembly","title":"Honeywell 51401952-100 Printed Circuit Board Assembly","description":"\u003cp\u003eConfigured for signal interface and backplane communication in Experion PKS and TDC 3000 control architectures, the \u003cstrong\u003eHoneywell 51401952-100\u003c\/strong\u003e (\u003cstrong\u003e51401952-100\u003c\/strong\u003e) PCB Assembly provides direct physical\/electrical execution of logic signal routing, EMI-shielded processing, and DCS network framing.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51401952-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e270 x 200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eExperion PKS, TDC 3000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHoneywell DCS Process Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART loop protocol:\u003c\/strong\u003e The PCB assembly facilitates the signal translation required for HART diagnostic integration. This is mandatory to decouple the primary process variable from the secondary diagnostic data stream, ensuring that HART overlays do not introduce noise into the control loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity:\u003c\/strong\u003e The multi-layer board is engineered to meet the impedance requirements of high-speed digital fieldbus backplanes. This is mandatory to prevent signal reflections that compromise deterministic communication during high-load process conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-channel isolation:\u003c\/strong\u003e The PCB layout integrates physical barriers and ground plane segmentation to prevent capacitive coupling between high-speed logic paths and low-level analog inputs. This isolation is mandatory to protect sensitive DCS inputs from localized electrical transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold junction compensation (CJC):\u003c\/strong\u003e The assembly utilizes thermal-tracking components to maintain accurate CJC for temperature measurement modules. This is mandatory for achieving precision in thermal control loops, as variations in PCB temperature must not manifest as measurement error.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 51401952-100 support hot-swapping within the Honeywell rack?\u003c\/p\u003e\n\u003cp\u003eA: No. Power must be isolated from the rack and the backplane must be de-energized before physical removal or installation. Hot-swapping risks arc discharge across the proprietary pins, which can permanently damage the PCB's multi-layer traces or the backplane connector.\u003c\/p\u003e\n\u003cp\u003eQ: How is the PCB protected against condensation in high-humidity environments?\u003c\/p\u003e\n\u003cp\u003eA: The assembly is designed for operating environments up to 95% RH (non-condensing). For deployment in environments prone to condensation, the use of a humidity-controlled cabinet or additional conformal coating is mandatory to prevent short circuits across high-density signal traces.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Seat the PCB into the rack’s card guide and engage the backplane connectors firmly. Mechanical alignment is mandatory to prevent terminal pin fatigue, which is a common cause of intermittent communication failures in DCS cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Secure the board to the rack chassis using the integrated mounting hardware. A low-impedance connection to the cabinet’s instrumentation earth bus is mandatory to ensure the efficacy of the PCB's internal EMI shielding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Keep all external cabling organized away from the board’s sensitive signal planes. Maintain a minimum separation of 150 mm from high-voltage AC lines, which is mandatory to prevent the injection of high-frequency noise into the assembly’s internal data registers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45192089796723,"sku":"51401952-100","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-09_13-38-43.png?v=1783576185","url":"https:\/\/www.dcssupplier.com\/ar\/products\/honeywell-51401952-100-printed-circuit-board-assembly","provider":"DcsSupplier Limited","version":"1.0","type":"link"}