{"product_id":"honeywell-cc-sdrx01-conversion-module","title":"Honeywell CC-SDRX01 Conversion Module","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell CC-SDRX01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eCC-SDRX01\u003c\/strong\u003e Fiber Optic Converter Module, operates as a dedicated hardware component for deterministic optical communication and I\/O link interface conversion within Experion PKS platforms. Designed to interface field control racks with controller backplanes over extended distances, the module converts electrical I\/O bus signals to high-speed optical pulses across a 9-port fiber array, isolating control network segments against high-voltage industrial interference while maintaining real-time signal propagation speed.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCC-SDRX01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.45 kg (1.00 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e18.5 cm x 12.0 cm x 4.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eMax 6.0 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Type\u003c\/td\u003e\n\u003ctd\u003eI\/O Link Interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia Type\u003c\/td\u003e\n\u003ctd\u003eFiber Optic Converter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Capacity\u003c\/td\u003e\n\u003ctd\u003e9 optical communication ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Platform\u003c\/td\u003e\n\u003ctd\u003eExperion PKS C300 \/ C200 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol \u0026amp; Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe module provides galvanic and optical isolation between the master controller rack and downstream I\/O expansion chassis. Signal processing hardware converts local backplane commands into noise-immune optical signals over 9 multi-mode fiber ports, preventing earth ground potential loops from affecting 4-20 mA HART loop protocol accuracy and downstream analog channel reliability. This optical barrier eliminates high-voltage transients, electrical noise, and electromagnetic interference along the transmission path, preserving deterministic update rates and signal resolution for sensitive analog field loops connected to peripheral I\/O racks.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the primary function of the 9 fiber optic ports on the module?\u003c\/p\u003e\n\u003cp\u003eA: The 9 optical ports serve as redundant and branch communication endpoints for the Honeywell I\/O Link bus. They allow a single controller node to communicate with multiple remote I\/O bases using fiber cables to bridge long physical distances without signal degradation.\u003c\/p\u003e\n\u003cp\u003eQ: Can the module be replaced live while the rest of the control network is operational?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module supports hot-swap replacement when installed in a dual-redundant I\/O Link topology. Removing or inserting the module on an active rack will not disrupt communication on the redundant link path, provided the parallel optical channel remains connected.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the module into the designated slot on the C300 chassis, ensuring the rear connector fully seats into the backplane guide rails.\u003c\/li\u003e\n\u003cli\u003eInspect all 9 optical fiber connectors for dust and contamination prior to insertion; clean with lint-free optical wipes if necessary.\u003c\/li\u003e\n\u003cli\u003eObserve minimum bend radius limits (typically 30 mm) when routing fiber optic cables inside the enclosure to avoid optical attenuation or glass fiber breakage.\u003c\/li\u003e\n\u003cli\u003eEnsure all unused optical ports are sealed with protective dust caps to prevent ambient dust from coating the internal optical transceivers.\u003c\/li\u003e\n\u003cli\u003eMaintain separate routing paths for fiber links and high-voltage AC power lines to avoid mechanical damage during routine panel maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45371273642099,"sku":"CC-SDRX01","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/CC-SDRX01.png?v=1787039152","url":"https:\/\/www.dcssupplier.com\/ar\/products\/honeywell-cc-sdrx01-conversion-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}