{"product_id":"yokogawa-sce401-11-s1-esb-bus-coupler-module","title":"Yokogawa SCE401-11 S1 ESB Bus Coupler Module","description":"\u003cp\u003eThe \u003cstrong\u003eYokogawa SEC401-11\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eSEC401-11\u003c\/strong\u003e ESB Bus Coupler Module, operates as a dedicated hardware component for high-speed network interfacing and data exchange between central controllers and distributed I\/O racks within Yokogawa CENTUM DCS architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSEC401-11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard DCS module form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial control environment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem backplane dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eESB bus coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Connectivity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART loop protocol:\u003c\/strong\u003e The coupler manages the deterministic transport of HART-compliant signal data from remote I\/O nodes, ensuring that process variable monitoring and instrument diagnostics reach the host controller without latency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity:\u003c\/strong\u003e The module provides the bridge between the high-speed ESB network and various fieldbus segments, facilitating stable, coordinated data propagation across the distributed control network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-channel isolation:\u003c\/strong\u003e The bus coupler utilizes electrical decoupling between the ESB interface logic and the field-side backplane to mitigate common-mode noise and protect the central control network from transient electrical faults.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold junction compensation (CJC):\u003c\/strong\u003e The module maintains precise internal timing and thermal references to preserve the deterministic nature of the ESB bus, ensuring that synchronization across distributed I\/O racks remains within system-specified tolerances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the SEC401-11 support hot-swapping within the ESB network?\u003c\/p\u003e\n\u003cp\u003eA: Hot-swapping is supported by the CENTUM DCS chassis architecture. However, ensure that the host controller is notified of the module removal or installation via the system configuration software to prevent temporary loss of communication with the associated I\/O rack.\u003c\/p\u003e\n\u003cp\u003eQ: How is the ESB bus redundancy managed by this module?\u003c\/p\u003e\n\u003cp\u003eA: The coupler module supports dual-redundant ESB network topologies. Ensure that both primary and secondary bus cables are properly terminated and routed through independent physical paths to maintain network availability during a single-cable failure.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Seat the module firmly into the designated ESB bus coupler slot in the control rack. Engage the mechanical locking levers to ensure full insertion and high-integrity contact with the backplane connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Bond the module chassis to the cabinet’s central protective earth (PE) bus. A low-impedance ground connection is mandatory to ensure the stability of the ESB interface and to maintain electromagnetic interference immunity in high-noise environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Connect ESB communication cables to the module ports, ensuring cable shields are properly grounded at the cabinet entry point. Maintain a minimum separation of 150 mm between ESB cabling and high-power AC lines to prevent induced jitter on the high-speed data bus.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":45228796477555,"sku":"SCE401-11 S1","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-10_10-11-55_9100a746-d257-41e9-a384-10e41cb4ee9c.png?v=1783925200","url":"https:\/\/www.dcssupplier.com\/ar\/products\/yokogawa-sce401-11-s1-esb-bus-coupler-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}