{"product_id":"abb-3hnp04014-1-lcd-display-module","title":"ABB 3HNP04014-1 LCD Display Module","description":"\u003cp\u003eConfigured for real-time visualization and parameter display in industrial robot controllers, the \u003cstrong\u003eABB 3HNP04014-1\u003c\/strong\u003e (\u003cstrong\u003e3HNP04014-1\u003c\/strong\u003e LCD Module w\/ Backlight) provides direct physical\/electrical execution. The hardware component connects to the internal display bus of the teach pendant unit, rendering operational status, axis coordinates, and system diagnostic alerts. The integrated backlight assembly maintains contrast and legibility across variable industrial ambient light conditions, operating on low-voltage DC power supplied directly via the host pendant mainboard.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e3HNP04014-1 (Replaces: 3HNP00005-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSweden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.16 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e148 x 107 x 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLow-voltage DC backlight and logic supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Technology\u003c\/td\u003e\n\u003ctd\u003eLiquid Crystal Display (LCD) with integrated backlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Type\u003c\/td\u003e\n\u003ctd\u003eRibbon cable \/ multi-pin flex connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control \u0026amp; Drive Integration\u003c\/h3\u003e\n\u003cp\u003eThe board architecture optimizes backplane bus communication velocity Licences and deterministic signal routing between the display controller and the primary processing unit. Designed for high reliability under continuous operation, the module features firmware flash compatibility to support seamless pixel mapping and font rendering across controller software versions. Compact physical integration protects internal display drivers against high-frequency electronic noise generated by nearby drive converters.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 3HNP04014-1 module directly replace the legacy 3HNP00005-1 display unit?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The 3HNP04014-1 is the direct manufacturer-designated replacement for part number 3HNP00005-1, maintaining mechanical pin compatibility and identical physical mounting dimensions.\u003c\/p\u003e\n\u003cp\u003eQ: Is hot-swapping permitted for this LCD module inside an active teach pendant?\u003c\/p\u003e\n\u003cp\u003eA: No. Auxiliary power to the teach pendant unit must be disconnected prior to replacing the LCD assembly to prevent electrical transient damage to the sensitive LCD logic lines and backlight inverter circuitry.\u003c\/p\u003e\n\u003cp\u003eQ: What is the recommended fix if the display exhibits faint or unreadable text after replacement?\u003c\/p\u003e\n\u003cp\u003eA: Check the flexible flat cable (FFC) seating in the connector lock mechanism to ensure proper alignment and low contact resistance. Additionally, verify contrast voltage parameters within the controller firmware setup menu.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Isolation\u003c\/strong\u003e: Turn off the main robot controller and disconnect the teach pendant cable before opening the housing unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Safety\u003c\/strong\u003e: Always work on an anti-static mat and wear a grounded wrist strap to prevent static discharge from damaging the integrated LCD driver chips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Connector Handling\u003c\/strong\u003e: Carefully unlatch the zero-insertion-force (ZIF) flex cable connector on the mainboard before removing the ribbon cable; avoid bending or applying tension to the ribbon leads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Fastening\u003c\/strong\u003e: Mount the LCD panel into the front enclosure bezel using light, uniform screw torque to avoid warping the glass substrate or creating uneven illumination across the backlight diffuser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Gasket Inspection\u003c\/strong\u003e: Ensure the perimeter rubber seal or gasket is intact and free of debris during reassembly to maintain ingress protection against dust and moisture.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":45421861798003,"sku":"3HNP04014-1","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/ABB3HNP04014-1.png?v=1788141558","url":"https:\/\/www.dcssupplier.com\/products\/abb-3hnp04014-1-lcd-display-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}