{"product_id":"abb-57120001-p-dsai130-analog-input-board","title":"ABB 57120001-P DSAI130 Analog Input Board","description":"\u003cp\u003eConfigured for high-density signal acquisition in distributed control architectures, the \u003cstrong\u003eABB 57120001-P\u003c\/strong\u003e (\u003cstrong\u003eDSAI 130\u003c\/strong\u003e) Analog Input Board provides direct physical\/electrical execution of multi-channel voltage and current signal conditioning and backplane-to-field data conversion.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e57120001-P (DSAI 130)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.52 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e327.6 x 236.7 x 14.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eController backplane dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Capacity\u003c\/td\u003e\n\u003ctd\u003eAnalog Input channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eABB Industrial Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane bus communication velocity:\u003c\/strong\u003e The board interfaces with the control bus at defined scan rates to ensure that analog input data is synchronized with the main processor execution cycle. This velocity is mandatory to maintain deterministic loop performance in automated processes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfinet \/ EtherNet\/IP deterministic networks:\u003c\/strong\u003e The module is engineered for integration within ABB control architectures, facilitating the transmission of process variables over high-speed deterministic network segments. This ensures that sensor feedback is available for real-time control logic execution without packet-level jitter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/O density scaling:\u003c\/strong\u003e The PCB layout supports modular expansion within the controller rack. This scaling is mandatory to accommodate high point-count instrumentation requirements while maintaining a standardized footprint across the control system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware flash compatibility:\u003c\/strong\u003e The hardware supports version-controlled firmware to ensure compatibility with evolving ABB system software. This allows for seamless integration into existing control platforms during system upgrades or maintenance cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the DSAI 130 support hot-swapping within the controller rack?\u003c\/p\u003e\n\u003cp\u003eA: No. Power must be isolated from the rack before inserting or removing the DSAI 130 board. Performing hot-swapping may induce electrical surges that can damage the module's precision A\/D conversion circuitry or corrupt the internal register mapping on the backplane bus.\u003c\/p\u003e\n\u003cp\u003eQ: How is the analog signal range configured for the input channels?\u003c\/p\u003e\n\u003cp\u003eA: The signal ranges are defined via the system configuration software. Physical jumpers are not utilized; ensure the field-side signal matches the software-defined parameters to prevent channel saturation or measurement inaccuracy.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Seat the board firmly into the designated rack slot and secure the locking fasteners. Precise alignment with the backplane connectors is mandatory to prevent intermittent communication faults or mechanical stress on the board’s PCB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Bond the board’s chassis ground point to the cabinet’s primary safety earth bus. A low-impedance ground connection is mandatory to provide effective electromagnetic shielding and to protect the internal circuitry from electrostatic discharge during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Connect field analog signals using shielded, twisted-pair cabling. Maintain a minimum separation of 150 mm from high-power AC output conduits to prevent inductive crosstalk, which is mandatory to protect the integrity of low-level analog measurements from noise injection.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":45191871627379,"sku":"57120001-P DSAI130","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-09_10-24-13_ccbb9d8b-db54-42fa-9e05-e1f72dca7a66.png?v=1783569464","url":"https:\/\/www.dcssupplier.com\/products\/abb-57120001-p-dsai130-analog-input-board","provider":"DcsSupplier Limited","version":"1.0","type":"link"}