{"product_id":"abb-ngdr-02c-driver-board","title":"ABB NGDR-02C Driver Board","description":"\u003cp\u003eConfigured for gate firing pulse generation and IGBT signal isolation in drive control power stacks, the \u003cstrong\u003eABB NGDR-02C\u003c\/strong\u003e (\u003cstrong\u003eNGDR-02C\u003c\/strong\u003e Driver Board) provides direct physical\/electrical execution. The board conditions control-level pulse-width modulation signals into high-current switching commands required to drive power semiconductors. It maintains continuous electrical isolation between high-voltage inverter circuits and low-voltage control electronics while transmitting fault and status feedback to the host controller.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNGDR-02C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eStandard ABB Manufacturing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.00 lbs (0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Drive Option \/ Gate Driver Form Factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLogic and gate-drive supply power draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubsystem Type\u003c\/td\u003e\n\u003ctd\u003eInterface Gate Driver Circuit Board (2-Card Kit Assembly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCircuit Protection\u003c\/td\u003e\n\u003ctd\u003eGalvanic and optoelectronic signal isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control and Internal Bus Integration\u003c\/h3\u003e\n\u003cp\u003eThe ABB NGDR-02C integrates directly into the drive power module framework, matching backplane bus communication velocity and preventing propagation delay during high-frequency pulse switching. Integrated driver circuitry ensures firmware flash compatibility with host processing units, enabling deterministic control execution across Profinet and EtherNet\/IP connected drive systems. Dedicated noise suppression traces prevent high-voltage switching transients from corrupting control logic signals, maintaining steady I\/O density scaling profiles across multi-axis drive configurations.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can individual cards from the 2-card kit assembly be installed separately?\u003c\/p\u003e\n\u003cp\u003eA: No. The NGDR-02C driver board is supplied as a matched 2-card kit engineered to operate in tandem within the drive power section. Both cards must be installed together to ensure balanced gate drive impedance and timing.\u003c\/p\u003e\n\u003cp\u003eQ: Is hot-swapping allowed for the NGDR-02C driver board during operation?\u003c\/p\u003e\n\u003cp\u003eA: No. Main power and control power must be completely disconnected, and the drive intermediate DC link capacitors must be fully discharged before servicing or replacing the board.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower De-Energization: Isolate all incoming three-phase AC power sources and verify that the drive DC link voltage has discharged to zero before opening the enclosure.\u003c\/li\u003e\n\u003cli\u003eESD Prevention: Handle the circuit board assembly using a grounded wrist strap attached to the metal frame of the drive chassis to prevent static discharge damage.\u003c\/li\u003e\n\u003cli\u003eMechanical Alignment: Align the NGDR-02C cards with the internal mounting standoffs. Tighten all retaining hardware to ensure low-resistance earth grounding through the board mounting pads.\u003c\/li\u003e\n\u003cli\u003eGate Cable Interconnection: Ensure all multi-pin ribbon cables and gate lead connectors are firmly seated with locking mechanisms fully engaged to avoid loose gate-control signals.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":45378172878963,"sku":"NGDR-02C","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/NGDR-02C-1_1500x1500_dc2c3db3-8b67-41ce-8d33-33659c1dee1b.jpg?v=1787209602","url":"https:\/\/www.dcssupplier.com\/products\/abb-ngdr-02c-driver-board","provider":"DcsSupplier Limited","version":"1.0","type":"link"}