{"product_id":"bently-nevada-170190-01-field-monitor-module","title":"Bently Nevada 170190-01 Field Monitor Module","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 170190-01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e170190\u003c\/strong\u003e Field Monitor Module, serves as the primary \u003cstrong\u003e170190\u003c\/strong\u003e Field Monitor Utilized to execute dual-channel signal isolation across machine protection system platforms. It manages signal path integrity and galvanic isolation constraints natively at the hardware tier to transmit localized sensor inputs parallel to master monitoring rack execution bus cycles.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e170190-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.44 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eInternal card slot deployment profile (NP0852-2 chassis matching)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eUp to +70 deg C maximum limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eBase configuration dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolator Architecture\u003c\/td\u003e\n\u003ctd\u003eDual-channel galvanic isolator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Threshold\u003c\/td\u003e\n\u003ctd\u003e250 V continuous isolation boundary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Lifecycle Status\u003c\/td\u003e\n\u003ctd\u003eDiscontinued by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMachinery Monitoring \u0026amp; Sensor Signal Integration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEddy-Current Probe Scaling and Validation:\u003c\/strong\u003e The module routes dynamic signals originating from proximity sensor networks, ensuring linear output voltage scaling remains proportional to the physical gap between the target shaft and the eddy-current probe tips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Voltage Validation and Reference Tracking:\u003c\/strong\u003e Internal circuit pathways actively track the steady-state DC bias component, confirming gap voltage validation targets remain within designated operational levels to prevent calibration shifts during machine start-up cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-Talk Suppression Across Interconnect Runs:\u003c\/strong\u003e Integrated dual-channel galvanic isolation barriers block ground loops and suppress electromagnetic cross-talk between adjacent transducer cabling lines, maintaining high-fidelity signal propagation into backend processing layers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What specific hardware behaviors manifest if the isolation threshold surpasses the 250 V boundary?\u003c\/p\u003e\n\u003cp\u003eA: Exceeding the 250 V continuous isolation barrier leads to electrical breakdown of the internal galvanic separation layers. This introduces common-mode electrical noise into the signal path and risk transferring high-voltage spikes straight into the backend evaluation logic.\u003c\/p\u003e\n\u003cp\u003eQ: Can this 0.44 lbs module be hot-swapped while the primary machinery protection rack is online and actively tracking vibration metrics?\u003c\/p\u003e\n\u003cp\u003eA: No. The internal slot interface logic lacks transient pre-charging traces to manage active hot-swapping. Extracting or inserting the module while the backplane is energized can generate voltage transients that disrupt neighboring monitoring cards and cause false alarm tripping.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45095254884467,"sku":"170190-01","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-06-24_14-58-01.png?v=1782286064","url":"https:\/\/www.dcssupplier.com\/products\/bently-nevada-170190-01-field-monitor-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}