{"product_id":"bently-nevada-330104-05-10-50-11-00-3300-xl-8-mm-probe","title":"Bently Nevada 330104-05-10-50-11-00 3300 XL 8 mm Probe","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330104-05-10-50-11-00\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330104\u003c\/strong\u003e 3300 XL 8 mm Probe, operates as a dedicated hardware component for continuous physical displacement tracking and dynamic shaft position monitoring within 3500 and 3300 Machinery Monitoring Systems. It converts physical clearance variations between the probe tip and target shaft into high-frequency radio frequency (RF) signal modulations without phase distortion across rotating machinery trains.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification \/ Dimension Details\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330104\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Probe (Metric M10 x 1 Thread Type, with armor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length Option: 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-10\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length Option: 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-50\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTotal Length Option: 5.0 meters (16.4 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-11\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConnector and Cable Type: Miniature coaxial ClickLoc connector with protector, FluidLoc cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e-00\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAgency Approval Option: Not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-05-10-50-11-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.323 kg (Shipping Weight: 1.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 thread, 50 mm unthreaded, 100 mm case length, 5.0 m total length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component (Powered via Proximitor loop -24 VDC supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 thread with armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eFluidLoc cable with ClickLoc miniature coaxial connector and protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling \u0026amp; Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 330104 probe relies on accurate eddy-current probe scaling to convert target shaft motion into accurate voltage signals. Factory calibrated to maintain a linear scale factor of 7.87 V\/mm (200 mV\/mil), the probe delivers continuous physical displacement data to matching Proximitor Sensors. Standard installation requires gap voltage validation (-10 VDC targets representing a 1.27 mm nominal center clearance) to position the tip squarely in the center of its linear operating zone. Maintaining exact system length targets (5.0 m total system length) prevents cross-talk suppression failures and guarantees precise rotor dynamics monitoring across radial probe pairs.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What specific protection is provided by the FluidLoc cable option (-11)?\u003c\/p\u003e\n\u003cp\u003eA: The FluidLoc cable configuration prevents oil, synthetic lubricants, and process liquids from leaking through the internal cable structure along conduit runs into clean enclosure connections.\u003c\/p\u003e\n\u003cp\u003eQ: Can this 5.0-meter total length probe be connected directly to a Proximitor sensor without an extension cable?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The 5.0-meter total length option (-50) allows direct connection to a 5.0-meter calibrated Proximitor Sensor, eliminating the need for an intermediate extension cable in short-run installations.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTorque the M10 x 1 probe thread to designated casing engagement limits, ensuring lock nuts are tightened to prevent mechanical backing out during operation.\u003c\/li\u003e\n\u003cli\u003eEnsure the ClickLoc coaxial connector protector is fully installed over the joint to seal out environmental contamination and moisture.\u003c\/li\u003e\n\u003cli\u003eRoute the armored cable along structural machine supports, preserving a minimum bend radius of 25.4 mm (1.0 in) to prevent coaxial core deformation.\u003c\/li\u003e\n\u003cli\u003eMaintain single-point shield grounding at the Proximitor housing to eliminate ground loop interference on dynamic signal channels.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45373473128563,"sku":"330104-05-10-50-11-00","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/24_86045f01-724e-470c-b23d-ce84b49c26fe.jpg?v=1787121201","url":"https:\/\/www.dcssupplier.com\/products\/bently-nevada-330104-05-10-50-11-00-3300-xl-8-mm-probe","provider":"DcsSupplier Limited","version":"1.0","type":"link"}