{"product_id":"emerson-2840a17g01-ovation-output-board","title":"Emerson 2840A17G01 Ovation Output Board","description":"\u003cp\u003eThe \u003cstrong\u003eEmerson 2840A17G01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e2840A17G01\u003c\/strong\u003e Output Board, operates as a dedicated hardware component for field signal activation within Ovation DCS backplane architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e2840A17G01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson \/ Westinghouse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eOutput Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArchitecture\u003c\/td\u003e\n\u003ctd\u003eOvation DCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.00 lbs (0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Ovation Rack Card Form Factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e3.0 W at 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eGalvanic Isolation \u0026amp; Signal Loop Processing\u003c\/h3\u003e\n\u003cp\u003eDesigned for process control applications, the module utilizes internal optical galvanic isolation to shield backplane processing logic from field load transients and voltage spikes. Precision output driver circuits continuously process controller commands to drive field actuators with minimal latency. Built-in output conditioning networks maintain stable electrical state switching while protecting internal logic channels against inductive kickback.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 2840A17G01 output board be inserted or removed while the Ovation rack is energized?\u003c\/p\u003e\n\u003cp\u003eA: No, power to the rack slot and external field power loops must be turned off before inserting or removing the board to prevent backplane bus disruption and hardware damage.\u003c\/p\u003e\n\u003cp\u003eQ: What grounding precautions must be observed when installing this output module?\u003c\/p\u003e\n\u003cp\u003eA: Ensure the card faceplate mounting screws are fully tightened to establish a solid ground connection between the module chassis and the cabinet ground bus.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the host Ovation rack and isolate external field supply power before inserting the module.\u003c\/li\u003e\n\u003cli\u003eFollow standard ESD procedures, including using a grounded wrist strap, when removing the board from its packaging.\u003c\/li\u003e\n\u003cli\u003eAlign the circuit board edges with the rack guide rails and push firmly until the backplane connectors fully engage.\u003c\/li\u003e\n\u003cli\u003eTighten top and bottom faceplate retention screws to lock the board into place and ensure frame grounding.\u003c\/li\u003e\n\u003cli\u003eRoute field wiring through low-voltage cable channels, keeping signal lines isolated from high-current AC power cables by at least 300 mm.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":66735231402099,"sku":"2840A17G01","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/2840A17G01_Cocoai_e287ab2d-de29-4457-9c8d-4149966154be.jpg?v=1790662615","url":"https:\/\/www.dcssupplier.com\/products\/emerson-2840a17g01-ovation-output-board","provider":"DcsSupplier Limited","version":"1.0","type":"link"}