{"product_id":"emerson-deltav-ve4003s2b4-analog-input-card","title":"Emerson DeltaV VE4003S2B4 Analog Input Card","description":"\u003cp\u003eThe \u003cstrong\u003eEmerson DeltaV VE4003S2B4\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eVE4003S2B4\u003c\/strong\u003e Analog Input Card, operates as a dedicated hardware component for acquiring and processing multi-channel analog sensor inputs within DeltaV distributed control architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eVE4003S2B4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson (DeltaV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.0 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard DeltaV M-series form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eStandard backplane power allocation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Loop Architecture\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4-20 mA HART loop protocol integration enables direct digital communication and real-time diagnostic polling alongside standard analog measurements.\u003c\/li\u003e\n\u003cli\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity support allows seamless bridging of auxiliary field instruments into the central control scheme.\u003c\/li\u003e\n\u003cli\u003eChannel-to-channel isolation features protect internal circuit boards from dangerous common-mode voltage spikes and ground loop currents.\u003c\/li\u003e\n\u003cli\u003eCold junction compensation (CJC) profiles are natively applied to preserve high-precision thermocouple and voltage reading accuracy across varying ambient conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What type of field signals are processed by the VE4003S2B4 module?\u003c\/p\u003e\n\u003cp\u003eA: The VE4003S2B4 is designed to process standard analog input signals, including current and voltage loops from field transmitters and sensors.\u003c\/p\u003e\n\u003cp\u003eQ: Is the VE4003S2B4 card compatible with active HART communication protocols?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the circuitry supports HART pass-through, enabling configuration and diagnostic data collection from HART-enabled field devices through the control system.\u003c\/p\u003e\n\u003cp\u003eQ: Can this analog input card be hot-swapped in an active system?\u003c\/p\u003e\n\u003cp\u003eA: Yes, M-series hardware supports module replacement under power when installed on compatible redundant or standard carrier assemblies, minimizing process downtime.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify that the carrier slot is completely clean and aligned before seating the VE4003S2B4 module to prevent backplane pin damage.\u003c\/li\u003e\n\u003cli\u003eEnsure all field wiring shields are properly grounded at the designated terminal blocks to minimize electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eCheck that terminal block screws are torqued correctly to maintain low-resistance connections under high-vibration conditions.\u003c\/li\u003e\n\u003cli\u003eConfirm that loop power supplies are correctly wired and isolated prior to software configuration and loop tuning.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":45267199754355,"sku":"VE4003S2B4","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/104_ee4acc13-9ec9-4333-91cf-24cec68cf304.png?v=1784612685","url":"https:\/\/www.dcssupplier.com\/products\/emerson-deltav-ve4003s2b4-analog-input-card","provider":"DcsSupplier Limited","version":"1.0","type":"link"}