{"product_id":"emerson-epro-con021-916-120-eddy-current-signal-converter","title":"Emerson EPRO CON021\/916-120 Eddy Current Signal Converter","description":"\u003cp\u003eThe \u003cstrong\u003eEmerson EPRO CON021\/916-120\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eCON021\u003c\/strong\u003e signal converter, operates as a dedicated hardware component for high-frequency signal conditioning within industrial condition monitoring networks. This module translates raw impedance shifts from connected eddy current transducers into standardized negative-going analog voltage signals, providing the necessary interface for API 670 compliant machinery protection racks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCON021\/916-120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson EPRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~120 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard DIN-mount housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-30 to +100 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSized by negative supply (-23 to -32 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity Sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0 to 20000 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRise Time\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 15 micro-seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eLMgSi 0.5 F22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Monitoring and Signal Dynamics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEddy-Current Probe Scaling:\u003c\/strong\u003e The CON021\/916-120 executes high-frequency oscillator modulation to track impedance variations at the probe tip. The module linearizes these shifts into a standardized -4 VDC to -20 VDC output range, maintaining precise signal mapping regardless of the transducer’s distance from the metallic target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Voltage Validation:\u003c\/strong\u003e Operation requires rigorous validation of the transducer's nominal air gap. The converter output must be calibrated to the factory-defined negative voltage target at the nominal gap setpoint. Deviations from this target signal indicate that the transducer is operating outside its linear measurement window, which risks signal saturation during high-amplitude shaft oscillations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntrinsic Safety and Hazardous Area Compliance:\u003c\/strong\u003e The converter assembly carries ATEX, IEC-Ex, and CSA approvals. When deployed in hazardous zones, the input circuit requires integration with an approved galvanic isolation barrier to limit energy delivery to the field-side probe, thereby preventing ignition of explosive atmospheres while maintaining the signal bandwidth of 20 kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the system compatible with standard 24 VDC positive-ground power supplies?\u003c\/p\u003e\n\u003cp\u003eA: No. The CON021\/916-120 requires a negative DC power rail (-23 V to -32 V). Applying positive voltage to the supply terminals will prevent the internal oscillator circuit from initializing and may damage the reverse-polarity protection circuitry.\u003c\/p\u003e\n\u003cp\u003eQ: Can the CON021 support different transducer types?\u003c\/p\u003e\n\u003cp\u003eA: The CON021 is designed for compatibility with specific EPRO series eddy current sensors (e.g., PR6422 through PR6453). It cannot be used with inductive sensors or non-EPRO transducers, as the oscillator frequency and impedance matching are tuned specifically to the electrical characteristics of the EPRO sensor line.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting and Alignment:\u003c\/strong\u003e Secure the converter housing using the four M5x20 screws provided. Ensure the DIN-rail or panel mounting surface is clean and provides a solid reference to the instrumentation earth. Vibration of the converter module itself must be minimized, as mechanical noise can induce microphonic noise into the oscillator circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding and Grounding:\u003c\/strong\u003e Terminate the transducer using the self-locking Lemo-plug. Route the supply and output wires through grounded metallic conduit to suppress electromagnetic interference. The cable shield must be terminated at the instrumentation rack's earth bus only; ensuring no conductive path exists between the probe housing and the instrumentation ground prevents parasitic ground loops and 50\/60 Hz signal noise.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Emerson Epro","offers":[{"title":"Default Title","offer_id":45149653893235,"sku":"CON021\/916-120","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-06-08_15-10-09_f4528a8a-80ec-45f2-98e6-0eed78293c56.png?v=1783047058","url":"https:\/\/www.dcssupplier.com\/products\/emerson-epro-con021-916-120-eddy-current-signal-converter","provider":"DcsSupplier Limited","version":"1.0","type":"link"}