{"product_id":"emerson-epro-pr6423-01c-030-current-sensor","title":"Emerson EPRO PR6423\/01C-030 Current Sensor","description":"\u003cp\u003eConfigured for precision shaft dynamics measurement in rotating machinery, the \u003cstrong\u003eEmerson Epro PR6423\/01C-030\u003c\/strong\u003e (\u003cstrong\u003ePR6423\u003c\/strong\u003e Eddy Current Sensor) provides direct physical signal translation. This hardware registers radial displacement, axial position, and rotational speed by detecting electromagnetic impedance shifts against a ferrous target, delivering a high-speed pulse train or continuous voltage stream for secondary processing.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePR6423\/01C-030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson Epro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~200 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eM10x1 threaded housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 to +180 deg C (Sensor); -35 to +150 deg C (Cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on host driver loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e2 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e8 V\/mm (203.2 mV\/mil) +\/- 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInitial Air Gap\u003c\/td\u003e\n\u003ctd\u003e0.5 mm (20 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget Material\u003c\/td\u003e\n\u003ctd\u003eFerromagnetic steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Metrics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART Loop Protocol Tracking:\u003c\/strong\u003e While the PR6423 sensor functions as a raw impedance-based transducer, the output from the matched signal converter (when coupled to the DCS) supports integration into 4-20 mA HART loop protocol parameters. This allows for localized diagnostic metadata—such as sensor health status and gap voltage warnings—to be transmitted alongside the primary displacement variable to the central control station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-Channel Isolation Parameters:\u003c\/strong\u003e When the signal is processed by the associated EPRO driver, strict channel-to-channel isolation parameters are maintained. This galvanic barrier prevents common-mode noise or ground potential differences from the field-side probe interface from coupling into the logic backplane, ensuring that an individual sensor fault cannot disrupt the measurement integrity of adjacent loops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the mechanical consequence of exceeding the minimum bending radius of the 6 mm armored cable?\u003c\/p\u003e\n\u003cp\u003eA: Exceeding the 35 mm minimum bending radius causes irreversible deformation of the internal coaxial geometry. This structural fatigue alters the cable impedance, leading to signal attenuation and permanent shifts in the factory-calibrated sensitivity of 8 V\/mm.\u003c\/p\u003e\n\u003cp\u003eQ: How does the system handle signal loss if the 0.5 mm air gap is breached during operation?\u003c\/p\u003e\n\u003cp\u003eA: The associated signal converter monitors the DC bias voltage of the probe. If the air gap is breached or if the probe moves outside the 2 mm linear range, the output signal enters a saturation state (typically \u0026gt; -20 V or \u0026lt; -4 V), triggering a fault flag in the DCS to indicate a loss of measurement validity.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Layout Alignment and Mechanical Seating:\u003c\/strong\u003e Install the M10x1 threaded probe housing into the mounting bracket or bearing casing. Advance the sensor until it touches the target shaft, then retract it to set the nominal 0.5 mm initial air gap. Verify this distance using a non-magnetic feeler gauge and secure the locknuts to prevent axial shifting due to machine vibrations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Separation and Shield Grounding:\u003c\/strong\u003e Route the 6 mm armored lead through metallic conduits isolated from high-voltage motor or VFD cabling. Ensure the overall braided shield is terminated at the signal converter bulkhead ground lug. Do not ground the cable shield at the probe end, as this creates a ground loop that will inject electromagnetic interference into the eddy current signal.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Emerson Epro","offers":[{"title":"Default Title","offer_id":45147362197619,"sku":"PR6423\/01C-030","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/143_460a9107-f2e6-46ad-ba99-1f0bcb14e675.png?v=1782986695","url":"https:\/\/www.dcssupplier.com\/products\/emerson-epro-pr6423-01c-030-current-sensor","provider":"DcsSupplier Limited","version":"1.0","type":"link"}