{"product_id":"emerson-kj4006x1-bb1-s-series-terminal-block","title":"Emerson KJ4006X1-BB1 S-Series Terminal Block","description":"\u003cp\u003eThe \u003cstrong\u003eEmerson KJ4006X1-BB1\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eKJ4006X1-BB1\u003c\/strong\u003e 8-Channel Terminal Block, serves as the primary \u003cstrong\u003eKJ4006X1-BB1\u003c\/strong\u003e PLC Module\/Rack utilized to execute direct field wiring terminations and signal routing tasks across Emerson DeltaV control platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ Part Number\u003c\/td\u003e\n\u003ctd\u003eKJ4006X1-BB1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson Automation Solutions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Family \/ Series\u003c\/td\u003e\n\u003ctd\u003eDeltaV S-Series I\/O Architecture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLifecycle Status\u003c\/td\u003e\n\u003ctd\u003eDiscontinued by Manufacturer (Legacy Spares Support Available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctional Category\u003c\/td\u003e\n\u003ctd\u003ePassive Field Wiring Terminal Block Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Density Scope\u003c\/td\u003e\n\u003ctd\u003e8 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical Connection Style\u003c\/td\u003e\n\u003ctd\u003eShrouded screw terminal connector compression blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor Type\u003c\/td\u003e\n\u003ctd\u003eModular S-Series plug-in block assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight\u003c\/td\u003e\n\u003ctd\u003e0.14 kg (0.31 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-40 to +70 deg C standard structural ambient limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity Envelope\u003c\/td\u003e\n\u003ctd\u003e5% to 95%, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Instrument Integration\u003c\/h3\u003e\n\u003cp\u003eThe 8-channel terminal block acts as the physical connection interface between field instruments and active DeltaV S-Series I\/O modules. It mounts directly onto the corresponding S-Series passive carrier slot, lining up with the card connections below it. The block features dedicated copper landing pads and screw terminal positions for 8 individual input or output signal loops, passing raw electrical currents straight to the processing layer without adding localized propagation delays.\u003c\/p\u003e\n\u003cp\u003eInternal trace isolation shields low-voltage signals from adjacent terminal crosstalk. Diagnostic tracking routes over Profinet, EtherNet\/IP, or native DeltaV deterministic networks through the active I\/O card and controller head. This modular design supports rapid I\/O density scaling routines and complete software configuration firmware flash compatibility by allowing field wiring harnesses to remain intact when an active electronic card is pulled for maintenance, keeping connection tracking secure.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the KJ4006X1-BB1 terminal block contain active electronic components or microprocessors?\u003c\/p\u003e\n\u003cp\u003eA: No. The terminal block is a passive electromechanical routing component. It provides physical wire termination points and internal copper traces to route signals to the active I\/O module, requiring no operating software or firmware flash steps.\u003c\/p\u003e\n\u003cp\u003eQ: Can this terminal block be unclipped from the carrier slot while the field loops are energized?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The passive terminal block can be detached or installed while field circuits are powered. However, field engineers must ensure that removing the block does not inadvertently open active control loops or leave uninsulated high-side voltage lines exposed inside the enclosure.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarrier Slot Mechanical Alignment:\u003c\/strong\u003e Line up the terminal block housing with the designated alignment tracks on the S-Series passive carrier frame. Press down firmly straight inward until the mechanical locking screws or latches seat completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Cable Strip and Compression:\u003c\/strong\u003e Strip individual field wire leads to the factory-specified insulation length. Insert the exposed conductor into the compression clamp terminal screw block and tighten to the specified torque rating to ensure a gas-tight electrical bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Wire Single-Point Grounding:\u003c\/strong\u003e Route twisted-pair signal wire shields directly to the carrier's integrated grounding bar. Terminate the shield at this single-point earth connection to safely divert high-frequency electromagnetic noise from the measurement circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Duct Routing Segregation:\u003c\/strong\u003e Lead all 8 channel signal wires out of the terminal block into dedicated low-voltage wire trays. Maintain structural separation from high-voltage AC lines or motor control cabling to block inductive noise coupling.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":45064406859891,"sku":"KJ4006X1-BB1","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-06-03_15-40-14_666f61e2-cc1f-470e-a045-e598e43c61cc.png?v=1780474033","url":"https:\/\/www.dcssupplier.com\/products\/emerson-kj4006x1-bb1-s-series-terminal-block","provider":"DcsSupplier Limited","version":"1.0","type":"link"}