{"product_id":"emerson-se4601t07-kl4201x1-ba1","title":"EMERSON SE4601T07  KL4201X1-BA1","description":"\u003cp\u003eThe \u003cstrong\u003eEmerson SE4601T07 KL4201X1-BA1\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eKL4201X1-BA1\u003c\/strong\u003e CHARM Baseplate, operates as a dedicated hardware component for power distribution and signal routing within Emerson DeltaV Electronic Marshalling platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSE4601T07 KL4201X1-BA1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA \/ Global Manufacturing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.50 kg (1.10 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard DeltaV CHARM Carrier Footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e6.3 VDC at 4 A (CHARM Bus)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eField Circuit Rating\u003c\/td\u003e\n\u003ctd\u003e24 VDC at 10 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eCHARM Baseplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003eEmerson DeltaV Control System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation Protocols\u003c\/h3\u003e\n\u003cp\u003eThe SE4601T07 KL4201X1-BA1 baseplate provides galvanic and optical isolation between field wiring terminals and the central control backplane. This isolation design prevents transient surges, ground loop currents, and common-mode noise from propagating from field devices into the DCS processing logic. Channel-to-channel isolation safeguards individual signal pathways across the CHARM array, ensuring deterministic data acquisition across harsh industrial environments.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What are the current and voltage parameters for the dual bus lines on this baseplate?\u003c\/p\u003e\n\u003cp\u003eA: The CHARM internal communication bus operates at 6.3 VDC supporting up to 4 A, while the field excitation power rail accommodates up to 24 VDC at a maximum load of 10 A.\u003c\/p\u003e\n\u003cp\u003eQ: Can CHARM modules be installed or removed from the baseplate while power is applied?\u003c\/p\u003e\n\u003cp\u003eA: Yes, CHARM modules are designed for hot-swapping on the baseplate under live power conditions. However, field power isolation procedures should be verified based on specific site safety protocols for hazardous area locations.\u003c\/p\u003e\n\u003cp\u003eQ: What mounting orientation and enclosure conditions are required for thermal dissipation?\u003c\/p\u003e\n\u003cp\u003eA: The baseplate must be secured vertically or horizontally on standard mounting rails within a protective enclosure. Maintaining adequate cabinet ventilation ensures the operating temperature remains strictly within the specified -40 to +70 deg C range.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the baseplate onto the DIN rail or backpanel, ensuring integrated grounding clips make firm metal-to-metal contact with the grounded rail.\u003c\/li\u003e\n\u003cli\u003eVerify that total connected field load on the secondary power rail does not exceed 10 A at 24 VDC before energizing circuits.\u003c\/li\u003e\n\u003cli\u003eRoute field wiring through dedicated cable channels, separating low-voltage instrument signal pairs from high-voltage AC lines.\u003c\/li\u003e\n\u003cli\u003eEnsure all shield wires are connected to the main grounding bus at a single physical point to avoid ground loops.\u003c\/li\u003e\n\u003cli\u003eConfirm cabinet ambient temperature remains between -40 and +70 deg C during continuous operation under full module load.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":45438026154099,"sku":"SE4601T07  KL4201X1-BA1","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/SE4601T07KL4201X1-BA1.png?v=1788416423","url":"https:\/\/www.dcssupplier.com\/products\/emerson-se4601t07-kl4201x1-ba1","provider":"DcsSupplier Limited","version":"1.0","type":"link"}