{"product_id":"epro-pr6423-003-130-eddy-current-displacement-sensor","title":"EPRO PR6423\/003-130 Eddy Current Displacement Sensor","description":"\u003cp\u003eThe \u003cstrong\u003eEpro PR6423\/003-130\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003ePR6423\u003c\/strong\u003e Eddy Current Displacement Sensor, operates as a dedicated hardware component for non-contacting shaft displacement tracking within turbomachinery protection systems. The field-mounted hardware component provides direct physical\/electrical execution to monitor radial shaft vibration, axial position, and structural displacement across turbines, compressors, and pumps. It interfaces natively with external signal converters at the hardware tier to drive real-time machinery safety loops parallel to the primary plant distributed control network.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePR6423\/003-130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEpro (Emerson Automation Solutions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg (Standard sensor head and integrated cable estimate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8 mm tip diameter with threaded stainless steel casing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 to +180 deg C (-31 to +356 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDriven via external eddy current signal converter rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003e+\/- 2.0 mm dynamic displacement span\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Sensitivity\u003c\/td\u003e\n\u003ctd\u003e8 V\/mm (203.2 mV\/mil) when paired with matching converter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget Material Profile\u003c\/td\u003e\n\u003ctd\u003eFerromagnetic steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure Resistance\u003c\/td\u003e\n\u003ctd\u003eUp to 10000 hPa (145 psi) at the sensor head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Material\u003c\/td\u003e\n\u003ctd\u003ePTFE insulation (optional armored cable available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP66 certified ingress protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity Sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring \u0026amp; TSI Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEddy-Current Probe Scaling and Inductive Modulation\u003c\/strong\u003e The PR6423\/003-130 radiates a high-frequency electromagnetic field from its 8 mm tip into the targeted ferromagnetic steel shaft. As mechanical gap distances fluctuate due to shaft vibration or axial shift, localized eddy currents alter the coil's inductive profile. An external converter translates these impedance variations into a standardized nominal sensitivity of 8 V\/mm, converting physical displacements into linear voltage variables before data packet packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Voltage Validation and Environmental Isolation\u003c\/strong\u003e The sensor head is structurally built to sustain a static voltage output linked directly to probe proximity, targeting a clean -10 VDC baseline during physical installation and alignment checks. The IP66 certified stainless steel casing and PTFE cable insulation isolate the internal coil assembly from environmental contamination, preventing moisture or lubricating oil ingress from disrupting the inductive loop measurements across the full -35 to +180 deg C operating window.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What specific hardware behaviors or signal faults manifest if the sensor tip suffers physical impact from the rotating shaft?\u003c\/p\u003e\n\u003cp\u003eA: Physical contact with the shaft typically deforms the PEEK tip or fractures the internal coil assembly, breaking the inductive circuit. This open-circuit condition instantly causes the external signal converter's output to rail to its maximum negative voltage limit, forcing the downstream monitoring rack to flag an unmasked sensor fault, drop its channel OK relay, and bypass active machinery trip voting logic.\u003c\/p\u003e\n\u003cp\u003eQ: Can the PR6423\/003-130 sensor head be deployed directly inside high-pressure casing zones?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the sensor features structural sealing that resists process pressures up to 10000 hPa (145 psi). This rating permits direct insertion into pressurized gearbox or bearing housings, keeping the internal electronics dry and operational without requiring external pressure-boundary isolation sleeves.\u003c\/p\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":45124054941811,"sku":"PR6423\/003-130","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-06-05_13-40-35_153ede42-48b3-4e77-b90f-182896cbafca.png?v=1782183060","url":"https:\/\/www.dcssupplier.com\/products\/epro-pr6423-003-130-eddy-current-displacement-sensor","provider":"DcsSupplier Limited","version":"1.0","type":"link"}