{"product_id":"ge-a03b-0807-c002-abu05a-backplane-rack-assembly","title":"GE A03B-0807-C002 ABU05A Backplane Rack Assembly","description":"\u003cp\u003eThe \u003cstrong\u003eGE A03B-0807-C002\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eA03B-0807-C002 (ABU05A)\u003c\/strong\u003e backplane rack assembly, serves as the primary \u003cstrong\u003eA03B-0807-C002\u003c\/strong\u003e 5-slot rack frame utilized to execute physical module alignment and backplane bus signal routing across PMC Processor I\/O platforms. This hardware assembly provides mechanical housing and low-impedance electrical interconnects for up to five discrete or analog interface modules. The chassis routes logic-level signals directly between card connectors and host processor control interfaces without active bus bridge propagation delays.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA03B\u003c\/strong\u003e: Designated product family base prefix for GE Fanuc machine control hardware and rack structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0807\u003c\/strong\u003e: Mechanical chassis footprint class, card guide layout, and backplane pin array specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC002\u003c\/strong\u003e: Specific structural variant defining a 5-slot physical enclosure configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABU05A\u003c\/strong\u003e: Functional hardware identifier denoting a 5-slot PMC I\/O base rack assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eA03B-0807-C002 (ABU05A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan \/ USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.04 lbs (0.47 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard 5-slot PMC rack footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive backplane bus pass-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot Capacity\u003c\/td\u003e\n\u003ctd\u003e5 Slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Interface\u003c\/td\u003e\n\u003ctd\u003eParallel PMC Backplane Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and I\/O Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThe GE A03B-0807-C002 chassis architecture maintains high backplane bus communication velocity via multi-pin gold-plated card-edge connectors. High-density trace layouts route field data and control lines directly to the host PMC processor, optimizing throughput across all five slots. Built to allow modular I\/O density scaling, the backplane frame suppresses cross-channel noise and supports deterministic scan cycles. Uncompromised firmware flash compatibility across attached interface cards ensures full address mapping continuity across cold restarts.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the A03B-0807-C002 backplane require an active power supply input card?\u003c\/p\u003e\n\u003cp\u003eA: The backplane operates as a passive routing structure. Operating voltage rails are distributed to installed modules directly via the host processor power bus interface lines.\u003c\/p\u003e\n\u003cp\u003eQ: Are there slot assignment restrictions on the 5-slot ABU05A rack assembly?\u003c\/p\u003e\n\u003cp\u003eA: Module placement depends on host controller configuration tables. Slot 1 typically hosts the primary master or CPU interface card, while remaining slots support standard digital and analog input\/output interface cards.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect all AC line power feeds to the control enclosure before mounting or removing the rack assembly.\u003c\/li\u003e\n\u003cli\u003eSecure the backplane frame to the enclosure backpanel using four pan-head screws through the outer chassis mounting slots.\u003c\/li\u003e\n\u003cli\u003eVerify that all card guide tracks are free of dust or debris before inserting PMC I\/O modules into target slots.\u003c\/li\u003e\n\u003cli\u003ePush modules firmly into the backplane connectors until mechanical locking tabs engage to ensure low electrical contact resistance.\u003c\/li\u003e\n\u003cli\u003eConnect the chassis enclosure frame directly to the main system earth ground point using a heavy-gauge braid or conductor.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE","offers":[{"title":"Default Title","offer_id":66750112465011,"sku":"A03B-0807-C002","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/A03B-0807-C0022.png?v=1790753071","url":"https:\/\/www.dcssupplier.com\/products\/ge-a03b-0807-c002-abu05a-backplane-rack-assembly","provider":"DcsSupplier Limited","version":"1.0","type":"link"}