{"product_id":"ge-a16b-2203-0190-07b-devicenet-interface-board","title":"GE A16B-2203-0190\/07B DeviceNet Interface Board","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc A16B-2203-0190\/07B\u003c\/strong\u003e , also cataloged as the \u003cstrong\u003eA16B-2203-0190\u003c\/strong\u003e DeviceNet Interface PCB, operates as a dedicated hardware component for high-speed fieldbus communication management within FANUC CNC and robotic control platforms. It serves as the physical network interface bridging internal backplane logic with remote I\/O blocks, valve manifolds, and auxiliary field devices.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eA16B-2203-0190\/07B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.1 cm x 33.7 cm x 17.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eBackplane Logic Supplied (5 VDC \/ 24 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eCommunication Modules \/ Fieldbus Interface PCBs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003eFANUC System 16i \/ 18i \/ 21i \/ R-J3 Controller Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Network Protocols\u003c\/h3\u003e\n\u003cp\u003eThe A16B-2203-0190\/07B board incorporates specialized communication controllers designed to maintain high backplane bus communication velocity and deterministic network throughput. Dedicated firmware flash compatibility enables real-time synchronization between the main controller CPU and connected DeviceNet slaves. The board features galvanic isolation across its CAN transceiver layer to prevent ground loops, high-frequency noise interference, and signal degradation across long network trunks.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the GE Fanuc A16B-2203-0190\/07B module support hot-swapping while the controller is powered?\u003c\/p\u003e\n\u003cp\u003eA: No. Hot-swapping this board is strictly prohibited. Inserting or removing the PCB while the system backplane is energized will cause permanent semiconductor failure and disrupt fieldbus communications.\u003c\/p\u003e\n\u003cp\u003eQ: What network baud rates does this DeviceNet interface board support?\u003c\/p\u003e\n\u003cp\u003eA: The module supports standard DeviceNet trunk line communication rates of 125 kbps, 250 kbps, and 500 kbps, dictated by total network cable length and system parameters.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure compliance with standard industrial electrical installation codes when replacing or servicing the unit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Isolation:\u003c\/strong\u003e Fully isolate all main AC power and external 24 VDC field power supplies to the controller cabinet before servicing. Verify a zero-energy state prior to removing enclosure covers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD and Handling:\u003c\/strong\u003e Wear a properly grounded anti-static wrist strap throughout board handling. Hold the PCB exclusively by its outer fiberglass edges or plastic frame components to avoid touching exposed trace paths or IC pins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Mounting \u0026amp; Engagement:\u003c\/strong\u003e Insert the card vertically into its assigned backplane slot inside the rack frame. Press firmly until the rear connector seats completely into the backplane, then lock down all mechanical retaining screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Termination and Shielding:\u003c\/strong\u003e Ensure the DeviceNet trunk line is properly terminated with 120-ohm resistor plugs at both physical ends of the network. Connect cable drain wires directly to the designated chassis ground lug to maintain noise immunity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE","offers":[{"title":"Default Title","offer_id":45455632531571,"sku":"A16B-2203-0190\/07B","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/A16B-2203-0190_2f73afda-51b1-4acf-bd48-6110e74aaa1b.png?v=1788753459","url":"https:\/\/www.dcssupplier.com\/products\/ge-a16b-2203-0190-07b-devicenet-interface-board","provider":"DcsSupplier Limited","version":"1.0","type":"link"}