{"product_id":"ge-fanuc-a13b-0154-b001-optical-i-o-link-adapter","title":"GE Fanuc A13B-0154-B001 Optical I\/O Link Adapter","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc A13B-0154-B001\u003c\/strong\u003e , also cataloged as the \u003cstrong\u003eA13B-0154\u003c\/strong\u003e Optical I\/O Link Adapter, operates as a dedicated hardware component for high-speed fiber-optic signal conversion within Fanuc F15\/F0 CNC I\/O Link network architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eA13B-0154-B001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eOptical I\/O Link Adapter (F15\/F0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage Rating\u003c\/td\u003e\n\u003ctd\u003e4.75 to 5.25 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Current\u003c\/td\u003e\n\u003ctd\u003e200 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Interface\u003c\/td\u003e\n\u003ctd\u003eElectrical-to-Optical Fiber Conversion (Fanuc I\/O Link)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003eFanuc Series 15 (F15) and Series 0 (F0) CNC Platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18 lbs (0.08 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eCompact Sub-D \/ PCB Mount Adapter Form Factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e1 W nominal (5 VDC at 200 mA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network Bus Conversion \u0026amp; Optical Isolation\u003c\/h3\u003e\n\u003cp\u003eThe GE Fanuc A13B-0154-B001 optical I\/O link adapter provides galvanically isolated signal conversion between electrical CNC I\/O bus signals and optical fiber channels. Operating within tight voltage limits of 4.75 to 5.25 VDC at 200 mA, the module eliminates ground loop interference and high-frequency noise spikes over extended cable distances. By sustaining deterministic network transmission rates across the Fanuc I\/O Link protocol, the adapter maintains firmware flash compatibility and prevents signal degradation between the main CPU and remote I\/O sub-assemblies.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What power source supplies the 4.75 to 5.25 VDC operating voltage to the A13B-0154-B001? A: Power is delivered directly through the host CNC I\/O interface port pins on the connected motherboard or I\/O module board.\u003c\/p\u003e\n\u003cp\u003eQ: Can this adapter be used across different Fanuc CNC series? A: The module is designed specifically for Fanuc Series 15 (F15) and Series 0 (F0) platforms supporting standard I\/O Link optical interfaces.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the host CNC cabinet and wait for power indicator LEDs to extinguish before attaching or removing the adapter.\u003c\/li\u003e\n\u003cli\u003eAlign the electrical interface connector precisely with the CNC motherboard port to avoid bending pin contacts.\u003c\/li\u003e\n\u003cli\u003eClean fiber-optic cable connectors with isopropyl alcohol wipes before inserting them into the optical transceivers.\u003c\/li\u003e\n\u003cli\u003eObserve the minimum bend radius specifications of the optical fiber cable to prevent light attenuation and signal loss.\u003c\/li\u003e\n\u003cli\u003eSecure all interface retention screws hand-tight to ensure mechanical strain relief and shield grounding.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE","offers":[{"title":"Default Title","offer_id":45455692267635,"sku":"A13B-0154-B001","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/A13B-0154-B001_2__Cocoai_2f76812a-43b9-48fa-9d59-cb206a7fff55.jpg?v=1788753006","url":"https:\/\/www.dcssupplier.com\/products\/ge-fanuc-a13b-0154-b001-optical-i-o-link-adapter","provider":"DcsSupplier Limited","version":"1.0","type":"link"}