{"product_id":"ge-fanuc-emerson-ic200gbi001-cf-versamax-genius-network-interface-unit","title":"GE Fanuc Emerson IC200GBI001-CF VersaMax Genius Network Interface Unit","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc Emerson IC200GBI001-CF\u003c\/strong\u003e is a VersaMax Genius Network Interface Unit (NIU) designed to integrate distributed I\/O architectures into a centralized control network. It functions as a gateway between local VersaMax expansion racks and high-level controllers, supporting up to 8 I\/O modules per rack and a maximum system capacity of 8 racks. Communication relies on the robust Genius protocol, allowing the module to interface with legacy and modern platforms such as Series 90-70, PACSystems RX7i, and PACSystems RX3i controllers.\u003c\/p\u003e\n\u003ch3\u003eNetwork Architecture and Communication Parameters\u003c\/h3\u003e\n\u003cp\u003eThe module features two dual Genius communication terminals configured in a daisy-chain topology using shielded twisted-pair or fiber-optic cabling. Transmission speeds vary depending on the network configuration, supporting 153.6 kbaud for extended setups, as well as 153.6 kbaud, 76.8 kbaud, and 38.4 kbaud for standard configurations. Network termination requires matching resistors rated at 75, 100, 120, or 150 ohms across serial terminals 1 and 2. Serial bus addresses are configurable from 0 to 31 via software or hardware settings.\u003c\/p\u003e\n\u003ch3\u003eI\/O Capacity and Memory Mapping\u003c\/h3\u003e\n\u003cp\u003eThe unit manages extensive data payloads, handling up to 1024 discrete input points and 1024 discrete output points, alongside 128 bytes of analog input memory and 128 bytes of analog output memory. Per bus scan, the NIU scans up to 128 bytes of network input data. Front-panel diagnostic LEDs—including PWR, OK, FAULTS, I\/O ENBL, FORCE, SBA ERR, and BUS B—provide real-time status indication for troubleshooting network communication and module health.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200GBI001-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc \/ Emerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eGenius Network Interface Unit (NIU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Line\u003c\/td\u003e\n\u003ctd\u003eVersaMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Controllers\u003c\/td\u003e\n\u003ctd\u003eSeries 90-70, PACSystems RX7i, PACSystems RX3i\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Communication Ports\u003c\/td\u003e\n\u003ctd\u003eTwo (2) Genius terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Transmission Rate\u003c\/td\u003e\n\u003ctd\u003e153.6 kbaud (Extended); 38.4, 76.8, and 153.6 kbaud (Standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Bus Address Range\u003c\/td\u003e\n\u003ctd\u003e0 to 31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Racks Supported\u003c\/td\u003e\n\u003ctd\u003e8 racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModules per Rack\u003c\/td\u003e\n\u003ctd\u003eUp to 8 modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiscrete I\/O Capacity\u003c\/td\u003e\n\u003ctd\u003e1024 inputs \/ 1024 outputs (2048 total)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog I\/O Memory\u003c\/td\u003e\n\u003ctd\u003e128 bytes input \/ 128 bytes output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Scan Capacity\u003c\/td\u003e\n\u003ctd\u003e128 bytes per scan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Topology\u003c\/td\u003e\n\u003ctd\u003eDaisy-chain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminating Resistor Options\u003c\/td\u003e\n\u003ctd\u003e75, 100, 120, or 150 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Rating\u003c\/td\u003e\n\u003ctd\u003e250 mA at 5 VDC; 10 mA at 3.3 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.00 lbs (0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Indicators\u003c\/td\u003e\n\u003ctd\u003ePWR, OK, FAULTS, I\/O ENBL, FORCE, SBA ERR, BUS B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation and Wiring Guidelines\u003c\/h3\u003e\n\u003cp\u003ePower down the rack completely before installing or removing the IC200GBI001-CF module to prevent backplane damage. Securely mount the unit onto the VersaMax rack carrier, ensuring the backplane connector aligns and seats fully. Connect the Genius bus communication cables to the dual terminals using a daisy-chain layout, and install appropriate 75 to 150-ohm terminating resistors at both physical ends of the network line. Verify that firmware revisions on both the host controller and the NIU match system requirements.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What controllers are compatible with the IC200GBI001-CF Network Interface Unit? A: The module is compatible with Series 90-70, PACSystems RX7i, and PACSystems RX3i controllers equipped with appropriate firmware revisions supporting the Genius protocol.\u003c\/p\u003e\n\u003cp\u003eQ: How are communication termination resistors selected for this module? A: Terminating resistors must match the characteristic impedance of the physical media, utilizing values of 75, 100, 120, or 150 ohms installed across serial terminals 1 and 2 at the network endpoints.\u003c\/p\u003e\n\u003cp\u003eQ: What is the maximum I\/O module capacity per rack and system? A: The NIU supports up to 8 modules per individual rack and a maximum of 8 racks total, accommodating up to 2048 discrete I\/O points.\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":67168482984051,"sku":"IC200GBI001-CF","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/IC200GBI001-FF_Cocoai_2347641e-1866-42c0-b026-7e81ef9c54cd.jpg?v=1794386496","url":"https:\/\/www.dcssupplier.com\/products\/ge-fanuc-emerson-ic200gbi001-cf-versamax-genius-network-interface-unit","provider":"DcsSupplier Limited","version":"1.0","type":"link"}