{"product_id":"ge-ic693chs392f-series-90-30-plc-baseplates","title":"GE IC693CHS392F Series 90-30 PLC Baseplates","description":"\u003cp\u003eConfigured for passive I\/O rack expansion in Series 90-30 platforms, the \u003cstrong\u003eGE IC693CHS392F\u003c\/strong\u003e (\u003cstrong\u003eIC693CHS392\u003c\/strong\u003e Expansion Baseplate) provides direct physical\/electrical execution. This 5-slot expansion chassis extends backplane power and data buses from the primary CPU rack to attached discrete, analog, and specialty modules via a dedicated 50-pin expansion cable interface.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC693CHS392F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.27 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e140 mm x 470 mm x 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Powered via installed power supply module at 5 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot Count\u003c\/td\u003e\n\u003ctd\u003e5 I\/O module slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackplane Type\u003c\/td\u003e\n\u003ctd\u003ePassive bus expansion backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Interface\u003c\/td\u003e\n\u003ctd\u003e1x 50-pin expansion cable port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication \u0026amp; IO Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThe passive expansion rack carries logic signals and system power across the parallel backplane bus communication velocity architecture, maintaining high-speed signal propagation between the remote CPU and installed field cards. Designed to optimize rack layout and I\/O density scaling, the 5-slot baseplate features mechanical keying mechanisms on each slot to prevent misinsertion of modules. Built-in bus line termination and shielded multi-conductor expansion pathways ensure firmware flash compatibility and stable scan cycles without signal degradation or timing jitter across extended rack distances.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the IC693CHS392F baseplate accept a Series 90-30 CPU module directly?\u003c\/p\u003e\n\u003cp\u003eA: No, expansion baseplates do not support CPU modules. Slot 1 is reserved for a standard Series 90-30 power supply module, while the remaining five slots host I\/O and specialty modules.\u003c\/p\u003e\n\u003cp\u003eQ: What is the maximum permitted cable distance between the main CPU baseplate and this expansion baseplate?\u003c\/p\u003e\n\u003cp\u003eA: The baseplate connects via a 50-pin expansion cable and can be located at a maximum distance of up to 50 feet from the primary CPU rack. Shielded cabling is required for runs exceeding 25 feet.\u003c\/p\u003e\n\u003cp\u003eQ: Does the IC693CHS392F passive backplane contain internal active components or battery backup circuits?\u003c\/p\u003e\n\u003cp\u003eA: No, the baseplate contains a completely passive printed circuit board without active integrated circuits or internal energy storage devices.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure primary power to the entire PLC system is de-energized before mounting the baseplate or connecting expansion cables.\u003c\/li\u003e\n\u003cli\u003eSecurely mount the steel chassis to the panel enclosure using all provided mounting tabs to establish a rigid grounding path.\u003c\/li\u003e\n\u003cli\u003eFully seat and screw-latch the 50-pin expansion cable connector to prevent intermittent backplane communication faults.\u003c\/li\u003e\n\u003cli\u003eVerify that a standard Series 90-30 power supply module is installed in the left-most power slot to feed 5 VDC to the backplane lines.\u003c\/li\u003e\n\u003cli\u003eMaintain adequate vertical clearance (at least 76 mm) above and below the baseplate to allow proper convective thermal dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE","offers":[{"title":"Default Title","offer_id":48380300066931,"sku":"IC693CHS392F","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/IC693CHS392C2_Cocoai.jpg?v=1789885625","url":"https:\/\/www.dcssupplier.com\/products\/ge-ic693chs392f-series-90-30-plc-baseplates","provider":"DcsSupplier Limited","version":"1.0","type":"link"}