{"product_id":"honeywell-19-rack-bgte-redundtrack-enclosures","title":"Honeywell 19＂RACK BGTE REDUNDTRack Enclosures","description":"\u003cp\u003eConfigured for high-availability control architectures, the \u003cstrong\u003eHoneywell 19\" RACK BGTE REDUNDANT\u003c\/strong\u003e (\u003cstrong\u003e19'' RACK BGTE\u003c\/strong\u003e Rack Enclosure) provides direct physical housing and bus management for redundant controller systems in DCS networks.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e19\" RACK:\u003c\/strong\u003e Denotes standard 19-inch equipment width compatibility for industrial chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBGTE:\u003c\/strong\u003e Specifies the backplane\/bus configuration designed for redundant I\/O and controller module support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eREDUNDANT:\u003c\/strong\u003e Indicates the chassis architecture is optimized for dual-path communication and fault-tolerant failover synchronization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e19\" RACK BGTE REDUNDANT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eStandard industrial steel assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e19-inch standard rack width\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (System bus powered)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Bus\u003c\/td\u003e\n\u003ctd\u003eRedundant backplane interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHoneywell DCS Process Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Bus Management:\u003c\/strong\u003e The integrated backplane facilitates deterministic communication between primary and redundant controller modules, ensuring system synchronization and bumpless failover during fault conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectromagnetic Compatibility:\u003c\/strong\u003e The reinforced steel frame serves as a passive shield, suppressing electromagnetic interference (EMI) generated by high-frequency switching hardware in proximity to the system bus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedundancy Support:\u003c\/strong\u003e The chassis architecture is optimized for redundant power and communication topologies, maintaining electrical isolation between redundant signal paths and minimizing common-mode noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural Integrity:\u003c\/strong\u003e Designed to support the static load of high-density I\/O arrays, the rack maintains mechanical stability under vibration, ensuring consistent pin alignment across the backplane bus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this rack include redundant power supply modules?\u003c\/p\u003e\n\u003cp\u003eA: No, this model is the structural and backplane enclosure. Redundant power supply units (PSUs) must be installed into the designated chassis slots according to the specific system power requirements.\u003c\/p\u003e\n\u003cp\u003eQ: Is the backplane hot-swap capable for controller modules?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the BGTE architecture is designed to support the hot-swapping of controller and I\/O modules, allowing for component maintenance without requiring a full system shutdown.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Ensure the rack is bolted to a grounded structural steel member. Use vibration-dampening washers if the cabinet is installed in an environment with high-frequency industrial noise or mechanical vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e The backplane relies on a common ground reference. Connect the rack's primary chassis ground lug directly to the central instrumentation ground bus using a multi-strand copper cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Seating:\u003c\/strong\u003e Verify that the system bus connector pins are free of debris. When inserting modules, ensure the locking levers are fully engaged to guarantee low-impedance electrical contact across the redundant backplane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Separate the field signal cables from the power distribution wiring within the rack to prevent inductive interference with the high-speed system bus signals.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45265380081779,"sku":"19＂RACK BGTE REDUNDT","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/19RackBGTERedundant_1ca156eb-3f00-4940-8bbd-71167074b533.png?v=1784542426","url":"https:\/\/www.dcssupplier.com\/products\/honeywell-19-rack-bgte-redundtrack-enclosures","provider":"DcsSupplier Limited","version":"1.0","type":"link"}