{"product_id":"honeywell-51204138-002-communication-cable-assembly","title":"Honeywell 51204138-002 Communication Cable Assembly","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell 51204138-002\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e51204138-002\u003c\/strong\u003e Cable, operates as a dedicated hardware component for high-integrity data signal transmission within Experion PKS and TDC 3000 DCS platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51204138-002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1-3 m (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot applicable (Passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eShielded twisted-pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHoneywell DCS Process Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART loop protocol:\u003c\/strong\u003e The cable assembly maintains signal impedance characteristics necessary for HART-enabled instrumentation. It supports the digital diagnostic overlay, ensuring that data packets between field transmitters and DCS I\/O modules remain error-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity:\u003c\/strong\u003e This cable functions as a physical transport medium for distributed control signals. It is engineered to maintain low signal propagation delay and high noise immunity, which is mandatory for the deterministic timing requirements of fieldbus architectures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-channel isolation:\u003c\/strong\u003e The multi-layer shielding construction is mandatory to decouple signal paths from electromagnetic interference. This minimizes the risk of signal crosstalk in densely wired DCS cabinets where multiple high-speed networks converge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold junction compensation (CJC):\u003c\/strong\u003e The connector interface and conductor material composition are optimized to minimize thermal EMF deviations. This is mandatory to prevent measurement errors at the interface of thermocouple or RTD input cards, ensuring that process temperatures recorded by the DCS match field values.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the 51204138-002 differ from the 51204138-001 in terms of physical deployment?\u003c\/p\u003e\n\u003cp\u003eA: While both share the same connectivity footprint, the 002 variant utilizes enhanced shielding materials. When upgrading, ensure the routing path is kept clear of high-voltage interference, as the improved EMI protection of the 002 variant is specifically intended to sustain stable communication in high-noise environments where the 001 may experience packet re-transmissions.\u003c\/p\u003e\n\u003cp\u003eQ: Is this assembly compatible with redundant DCS network controllers?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The 51204138-002 is rated for use in primary and redundant controller paths. When deploying in redundant configurations, ensure that both primary and secondary cable paths are routed through physically distinct pathways to maintain the integrity of the redundancy scheme.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Secure the proprietary connectors firmly until the locking mechanism engages. Ensure the cable is supported by tie-wraps at regular intervals to prevent excessive strain on the connector interface, which is mandatory for long-term mechanical stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Bond the cable shield to the cabinet’s dedicated instrument earth bus. A clean, low-impedance connection is mandatory to ensure the shield effectively drains electromagnetic noise and maintains the signal-to-noise ratio of the control data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Maintain at least 150 mm of separation between this cable assembly and high-voltage power conduits. This isolation is mandatory to prevent inductive coupling and ensure the stability of control signals across the DCS network.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45189671125107,"sku":"51204138-002","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-02_16-13-46_4459b394-9237-4410-b393-72f54ff2865f.png?v=1783503397","url":"https:\/\/www.dcssupplier.com\/products\/honeywell-51204138-002-communication-cable-assembly","provider":"DcsSupplier Limited","version":"1.0","type":"link"}