{"product_id":"honeywell-51307069-175-input-modules","title":"Honeywell 51307069-175 Input Modules","description":"\u003cp\u003eConfigured for high-density signal acquisition in Experion PKS C300 platforms, the \u003cstrong\u003eHoneywell 51307069-175\u003c\/strong\u003e (\u003cstrong\u003e51307069-175\u003c\/strong\u003e Analog Input Module) provides direct physical signal conversion from field-side sensors to 12-bit digital data for process control systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51307069-175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSubject to specific batch manufacturing data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100 mm x 100 mm x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC (approx. 95 mA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Input\u003c\/td\u003e\n\u003ctd\u003e0-10 VDC, 0-20 mA, 4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e12-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHoneywell DCS Process Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-Channel Isolation:\u003c\/strong\u003e The module incorporates 1500 VAC RMS optical isolation to prevent common-mode noise propagation and ground loops between disparate field sensor circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART Connectivity:\u003c\/strong\u003e The input stages are compatible with standard 4-20 mA HART loop protocols, facilitating end-to-end device diagnostics when paired with compliant field transmitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Integrity:\u003c\/strong\u003e Each input channel features a nominal impedance of 4.2 kOhm, designed to minimize loading effects on sensitive process loops while maintaining signal linearity within +\/- 0.5% full scale.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeterministic Timing:\u003c\/strong\u003e The module supports selectable scan times (5 ms to 20 ms) and provides 1 ms sequence of events (SOE) resolution, ensuring temporal accuracy for critical process alarms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this module perform hot-swapping under full operational load?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the 51307069-175 supports hot-swapping within the C300 chassis. Ensure the terminal block is correctly keyed to the module before insertion to prevent incorrect signal routing.\u003c\/p\u003e\n\u003cp\u003eQ: Does the module require external calibration for the 4-20 mA ranges?\u003c\/p\u003e\n\u003cp\u003eA: The module is factory calibrated for its defined ranges. If field conditions deviate, accuracy should be verified using a certified process calibrator, and adjustments should be performed through the Experion PKS engineering station configuration interface.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Install the module onto a standard DIN rail or panel mount as per the cabinet layout. Verify that the grounding clip is properly seated to provide a low-impedance path to the cabinet backplane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Utilize shielded twisted-pair cabling for all analog signals. Terminate shields to the designated I\/O common rail or cabinet ground bus to satisfy noise immunity requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Thresholds:\u003c\/strong\u003e For digital input functions, verify that the field device switching voltage is above 13 VDC for an \"ON\" state and below 5 VDC for an \"OFF\" state to ensure reliable logic state transitions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e While the module supports operation up to 85 deg C, avoid direct exposure to high-heat sources to minimize the risk of component thermal fatigue over long-term operation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45265374576755,"sku":"51307069-175","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-20_16-19-24.png?v=1784542365","url":"https:\/\/www.dcssupplier.com\/products\/honeywell-51307069-175-input-modules","provider":"DcsSupplier Limited","version":"1.0","type":"link"}