{"product_id":"honeywell-620-0048-ipc-620-data-collection-module","title":"Honeywell 620-0048 IPC 620 Data Collection Module","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell 620-0048\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e620-0048\u003c\/strong\u003e Data Collection Module, operates as a dedicated hardware component for serial data aggregation and field telemetry processing within Honeywell IPC 620 PLC rack platforms. Equipped with an integrated 25-pin Sub-D connector and diagnostic status LEDs, the module executes real-time data collection and transfers telemetry across the backplane bus without interrupting primary controller scan cycles.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e620-0048\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.90 lbs (0.41 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard IPC 620 rack-slot profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +60 deg C (+32 to +140 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5 W maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eData Collection PC Board Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Interface\u003c\/td\u003e\n\u003ctd\u003e25-pin Sub-D connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiagnostic Display\u003c\/td\u003e\n\u003ctd\u003eOnboard status LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Platform\u003c\/td\u003e\n\u003ctd\u003eHoneywell IPC 620 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHoneywell DCS Process \u0026amp; Loop Safety Diagnostics\u003c\/h3\u003e\n\u003cp\u003eThe 620-0048 implements channel-to-channel isolation safeguards across its serial communication interface to suppress ground loops and protect backplane logic from field-side voltage spikes. Internal parity check algorithms monitor data stream integrity via the 25-pin Sub-D port in real time. In the event of a serial link disconnection or frame parity error, the module triggers a diagnostic interrupt and forces output registers into a fail-safe hold state. Hardware operating status and communication fault flags write directly to nonvolatile memory to ensure status retention during total system power loss.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 620-0048 Data Collection Module be replaced while the IPC 620 chassis is powered?\u003c\/p\u003e\n\u003cp\u003eA: No. Power to the IPC 620 rack must be fully isolated before removing or seating the board to prevent electrical arcing across backplane pins and component degradation.\u003c\/p\u003e\n\u003cp\u003eQ: What functions do the front-panel status LEDs perform?\u003c\/p\u003e\n\u003cp\u003eA: The onboard status LEDs provide direct physical indication of serial transmission state, receive activity, module power rails, and active communication bus error conditions.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDe-energize primary AC power to the IPC 620 chassis and confirm zero voltage across line terminals using a calibrated meter.\u003c\/li\u003e\n\u003cli\u003eAlign the top and bottom edges of the 620-0048 board with the designated rack card guides.\u003c\/li\u003e\n\u003cli\u003eSlide the board smoothly into the slot until the rear edge connectors press fully into the backplane socket.\u003c\/li\u003e\n\u003cli\u003eFasten the faceplate mounting screws firmly to establish electrical ground bonding and secure the 25-pin Sub-D cable strain relief.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45503457198195,"sku":"620-0048","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/620-00522_Cocoai.jpg?v=1789524958","url":"https:\/\/www.dcssupplier.com\/products\/honeywell-620-0048-ipc-620-data-collection-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}