{"product_id":"honeywell-620-0060-ipc-620-communication-module","title":"Honeywell 620-0060 IPC 620 Communication Module","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell 620-0060\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e620-0060\u003c\/strong\u003e Communication Modules, operates as a dedicated hardware component for deterministically transferring serial network frames and field device data within Honeywell IPC 620 control systems. Installed in the local chassis backplane, it executes protocol conversion routines and handles data traffic exchange directly between the main processor and peripheral network lines.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e620-0060\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.40 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard single-slot IPC 620 card form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eBackplane powered from IPC 620 chassis power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eSerial Communication Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Interface\u003c\/td\u003e\n\u003ctd\u003eIPC 620 Rack Backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; Network Interface Execution\u003c\/h3\u003e\n\u003cp\u003eThe communication module isolates real-time data exchanges across field networks, utilizing channel-to-channel isolation to prevent electrical interference from disturbing core logic operations. It supports structured 4-20 mA HART loop protocol device integration across gateway drop points, managing buffer allocations and backplane arbitration to maintain continuous signal integrity under high bus load conditions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 620-0060 communication module be inserted into or extracted from the rack while backplane power is active?\u003c\/p\u003e\n\u003cp\u003eA: No. Hot-swapping the module while 120 VAC or backplane DC power is applied can induce electrical transients that damage board components or cause serial line data corruption. Always isolate main power to the rack chassis before inserting or removing the unit.\u003c\/p\u003e\n\u003cp\u003eQ: What grounding procedure should be followed for serial communication lines connected to the 620-0060?\u003c\/p\u003e\n\u003cp\u003eA: Serial communication cable shielding must be connected to the cabinet protective earth (PE) bus at a single point to prevent ground loop currents from degrading signal transmission.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Isolation:\u003c\/strong\u003e Shut down all electrical power to the IPC 620 rack chassis before installing, removing, or adjusting connections on the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule Mounting:\u003c\/strong\u003e Align the module card edges with the designated chassis slot guides and push firmly until the rear backplane edge connector is fully seated. Lock top and bottom retaining screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Line Shielding:\u003c\/strong\u003e Route serial communication lines through dedicated conduit away from high-voltage motor feeds, ignition cables, or AC power lines to mitigate electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Grounding:\u003c\/strong\u003e Verify that the IPC 620 chassis frame has a direct, low-impedance connection to the master panel protective earth (PE) system.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45464494637171,"sku":"620-0060","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/620-3030_2_8996722d-fd60-44e7-a879-dde8f1cb3e26.png?v=1788935381","url":"https:\/\/www.dcssupplier.com\/products\/honeywell-620-0060-ipc-620-communication-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}