{"product_id":"honeywell-620-k0025-620-series-analog-output-module","title":"Honeywell 620-K0025 620 Series Analog Output Module","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell 620-K0025\u003c\/strong\u003e , also cataloged as the \u003cstrong\u003e620-K0025\u003c\/strong\u003e Analog Output Module, serves as the primary \u003cstrong\u003e620 Series\u003c\/strong\u003e Analog Output Module utilized to execute digital-to-analog signal conversion for field control devices across Honeywell IPC 620 platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e620-K0025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.36 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e12.8 cm x 8.2 cm x 3.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e4.32 W (24 VDC ±10%, 180 mA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e8 independent channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC Resolution\u003c\/td\u003e\n\u003ctd\u003e14-bit per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Ranges\u003c\/td\u003e\n\u003ctd\u003e0 to 10 VDC, ±10 VDC, 0-20 mA, 4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003e1x 20-pin terminal block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol \u0026amp; Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe module provides conversion of controller commands using eight independent 14-bit DACs with a fast settling time of 3 ms for full-scale step changes. Each channel can be configured independently for voltage or current mode, accommodating load impedances of minimum 2 k Ohm for voltage outputs and maximum 600 Ohm for current loops. Two internal 100 uF tantalum capacitors deliver a 10 ms power hold-up time to sustain output values during brief 24 VDC voltage sags, maintaining output stability within ±0.1% full scale accuracy across the operating temperature range.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How is wire termination managed on the 20-pin terminal block for mixed voltage and current outputs?\u003c\/p\u003e\n\u003cp\u003eA: The 20-pin terminal block accepts wire sizes from 0.2 mm2 to 2.5 mm2. Twisted-pair cables with one wire grounded should be used for voltage signals, while standard two-wire cables are recommended for current loop wiring.\u003c\/p\u003e\n\u003cp\u003eQ: What protection mechanisms are integrated into the module power and output circuitry?\u003c\/p\u003e\n\u003cp\u003eA: The 24 VDC power input features built-in reverse polarity protection, and each individual analog output channel includes short-circuit protection to prevent hardware damage from field wiring faults.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the module securely on a standard DIN rail or fasten directly to a cabinet panel using M4 mounting screws.\u003c\/li\u003e\n\u003cli\u003eEnsure the 24 VDC power source is switched off before terminating wiring at the 20-pin terminal block.\u003c\/li\u003e\n\u003cli\u003eKeep analog output wiring separated from high-voltage AC conductors to reduce electromagnetic interference, using shielded twisted-pair cables for voltage channel runs.\u003c\/li\u003e\n\u003cli\u003eVerify cabinet ambient conditions do not exceed the operating range of -20 deg C to 60 deg C and relative humidity remains below 95% non-condensing.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45443094839411,"sku":"620-K0025","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/620-K0025_9bddc48b-c0aa-4025-9732-efeeeeef5218.png?v=1788494278","url":"https:\/\/www.dcssupplier.com\/products\/honeywell-620-k0025-620-series-analog-output-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}