{"product_id":"honeywell-tp-opadp1-200-spub5-302-operator-advisor-panel","title":"Honeywell TP-OPADP1-200 SPUB5-302 Operator Advisor Panel","description":"\u003cp\u003eConfigured for local process visualization and command execution in Honeywell automation architectures, the \u003cstrong\u003eHoneywell SPUB5-302\u003c\/strong\u003e (\u003cstrong\u003eTP-OPADP1-200\u003c\/strong\u003e) Operator Advisor Panel provides direct physical\/electrical execution of LCD parameter monitoring, keypad-based navigation, and controller interface management.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSPUB5-302 (TP-OPADP1-200)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e14.6 x 8.3 x 3.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O\/Display\u003c\/td\u003e\n\u003ctd\u003e128 x 64 LCD, 5-button keypad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHoneywell DCS Process Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART loop protocol:\u003c\/strong\u003e The TP-OPADP1-200 interfaces with Honeywell Excel controllers that aggregate HART diagnostic data. This is mandatory for viewing transmitter health metrics and process variables directly at the panel-mount interface without requiring dedicated engineering workstations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity:\u003c\/strong\u003e The unit acts as a bridge for operator commands to Fieldbus-enabled motion control systems via the LCNP02-100 interface card. This connectivity is mandatory to ensure that parameter adjustments are processed with the timing precision required for deterministic control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-channel isolation:\u003c\/strong\u003e The internal circuitry incorporates galvanic isolation between the communication port and the panel logic. This isolation is mandatory to protect the display module from ground potential differences and common-mode noise inherent in industrial cabinet environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold junction compensation (CJC):\u003c\/strong\u003e The interface architecture maintains stable internal operating conditions to prevent thermal-induced inaccuracies in the LCD drivers or keypad logic. This is mandatory for maintaining clear visual status reporting in environments where panel surface temperatures fluctuate significantly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the TP-OPADP1-200 capable of standalone logic execution?\u003c\/p\u003e\n\u003cp\u003eA: No. The panel functions strictly as an HMI and monitoring interface. All control logic and automation algorithms reside within the connected Honeywell Excel controllers or associated interface cards; the panel merely reflects and allows for the modification of defined memory registers.\u003c\/p\u003e\n\u003cp\u003eQ: Can the screw terminals be wired while the system is powered?\u003c\/p\u003e\n\u003cp\u003eA: No. Power must be isolated from the panel and the associated control loop before making wiring changes. Working on live screw terminals can cause short circuits between adjacent signals or induce electrical transients that may damage the panel's internal communication interface.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Install the unit in a panel cutout using the provided mounting hardware. Ensuring the faceplate is flush against the enclosure is mandatory to meet the indoor environmental requirements and to prevent mechanical strain on the unit housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Terminate the chassis ground to the cabinet’s central safety earth bus. A low-impedance connection is mandatory to provide effective EMI\/RFI shielding and to ensure the display and keypad remain free from electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Connect control signals using appropriately rated wire gauge on the screw terminals. Keep signal cabling physically separated from high-voltage AC lines by at least 150 mm; this isolation is mandatory to prevent inductive noise injection into the serial communication link.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":45192090910835,"sku":"TP-OPADP1-200 SPUB5-302","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-09_13-40-21_321087d9-638b-488b-bd3b-5a9b228befd4.png?v=1783576546","url":"https:\/\/www.dcssupplier.com\/products\/honeywell-tp-opadp1-200-spub5-302-operator-advisor-panel","provider":"DcsSupplier Limited","version":"1.0","type":"link"}