{"product_id":"keb-00-f4-071-0039-inverter-interface-board","title":"KEB 00.F4.071-0039 Inverter Interface Board","description":"\u003cp\u003eThe \u003cstrong\u003eKEB 00.F4.071-0039\u003c\/strong\u003e (\u003cstrong\u003e00.F4.071-0039\u003c\/strong\u003e) serves as the primary I\/O and inverter interface board utilized to execute analog signal conditioning and drive control across KEB COMBIVERT F4-series platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e00.F4.071-0039\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eKEB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eStandard PCB assembly weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard F4-series interface form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eInverter internal bus supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eI\/O \/ Inverter Interface Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Drive and Motion Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eV\/Hz and Field-Oriented Vector Control:\u003c\/strong\u003e The module provides the necessary signal processing paths for the F4-series inverter to execute V\/Hz and field-oriented vector control. It facilitates the feedback of motor status parameters required for maintaining flux and torque loop stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarmonic Distortion Suppression:\u003c\/strong\u003e The interface board includes integrated signal filtering stages designed to mitigate the ingress of high-frequency switching noise common in inverter output stages, ensuring clean analog reference signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Loop Feedback Response:\u003c\/strong\u003e By providing differential analog inputs, the board minimizes signal degradation over the path from the field-side sensor to the inverter control logic, ensuring high-fidelity feedback response for motion-critical applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Heat Sink Dissipation Profiles:\u003c\/strong\u003e The PCB layout is optimized for integration with the inverter chassis, allowing for efficient dissipation of thermal energy generated by onboard interface components during continuous high-frequency drive operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the board support galvanic isolation for the analog input signals?\u003c\/p\u003e\n\u003cp\u003eA: The differential input design provides common-mode noise rejection. Ensure that input signal ground references are compatible with the F4-series internal analog ground to prevent unintended ground loops.\u003c\/p\u003e\n\u003cp\u003eQ: Is a firmware update required when installing this interface board into an existing F4 drive?\u003c\/p\u003e\n\u003cp\u003eA: Verification of current inverter firmware is recommended. If the board is used for a functional upgrade, confirm that the host inverter's parameter set is updated to recognize the specific I\/O configurations mapped by this board.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Ensure the inverter is completely de-energized and capacitors have fully discharged before opening the housing. Seat the interface board firmly into the designated F4-series slot, ensuring all PCB edge connectors align with the inverter's internal backplane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Use the provided grounding points on the PCB to bond the board chassis to the inverter enclosure. This is necessary for the integrity of the board’s EMI shielding against high-frequency electrical noise generated by the inverter’s IGBT modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Employ shielded, twisted-pair cabling for all differential analog connections. Terminate the shields at the inverter’s designated signal ground lug to maintain the noise-rejection performance of the differential input architecture.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KEB","offers":[{"title":"Default Title","offer_id":45164724322419,"sku":"00.F4.071-0039t","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/11f31ef9062c4732b7dd65372bc684a6_d320a577-160f-408e-ba0b-aab90c71c424.png?v=1783388311","url":"https:\/\/www.dcssupplier.com\/products\/keb-00-f4-071-0039-inverter-interface-board","provider":"DcsSupplier Limited","version":"1.0","type":"link"}