{"product_id":"schneider-bmxamm0600-analog-i-o-modules","title":"Schneider BMXAMM0600 Analog I\/O Modules |","description":"\u003cp\u003eThe \u003cstrong\u003eSchneider Electric BMXAMM0600\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eBMXAMM0600\u003c\/strong\u003e Analog Input\/Output Module, operates as a dedicated hardware component for hybrid analog signal conditioning within Modicon M340 and Modicon X80 platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eBMXAMM0600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eFrance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e32 mm x 100 mm x 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e2.6 W typical (3.2 W maximum at 24 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Inputs\u003c\/td\u003e\n\u003ctd\u003e4 channels (non-isolated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Ranges\u003c\/td\u003e\n\u003ctd\u003e0-20 mA, 4-20 mA, +\/-10 V, 0-10 V, 0-5 V, 1-5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Resolution\u003c\/td\u003e\n\u003ctd\u003e12 to 14 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Outputs\u003c\/td\u003e\n\u003ctd\u003e2 channels (non-isolated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Ranges\u003c\/td\u003e\n\u003ctd\u003e0-20 mA, 4-20 mA, +\/-10 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Resolution\u003c\/td\u003e\n\u003ctd\u003e11 to 12 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks and Backplane Bus Velocity\u003c\/h3\u003e\n\u003cp\u003eThe module executes direct data exchange with the primary Modicon X80 backplane via high-velocity bus architecture, ensuring deterministic register updates for both input scanning and output loop generation. Internal logic maintains strict synchronization with system execution clocks, minimizing loop conversion latency across current and voltage ranges. Firmware flash compatibility within the host CPU allows seamless hardware recognition, continuous channel diagnostic monitoring, and configuration parameter pushing upon initial backplane enumeration.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Are the analog input and output channels isolated from each other?\u003c\/p\u003e\n\u003cp\u003eA: No. The BMXAMM0600 is a non-isolated hybrid module, meaning channel group common points share internal reference lines within the module circuit assembly.\u003c\/p\u003e\n\u003cp\u003eQ: What power rail supplies the primary module load?\u003c\/p\u003e\n\u003cp\u003eA: The module draws operational power from the 24 VDC rack power supply bus, consuming 2.6 W under nominal operating conditions up to a maximum of 3.2 W.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn off main power to the Modicon X80 \/ M340 rack chassis and lock out supply lines before installing or removing modules.\u003c\/li\u003e\n\u003cli\u003ePut on an anti-static wrist strap connected directly to the cabinet earthing point to prevent electrostatic discharge.\u003c\/li\u003e\n\u003cli\u003eLocate an available slot on the X80 backplane bus and align the rear slot guides with the board edge.\u003c\/li\u003e\n\u003cli\u003ePush the module firmly into the slot until the top and bottom mechanical locking latches snap into place.\u003c\/li\u003e\n\u003cli\u003eTerminate analog field signal cables using shielded twisted-pair wiring, ensuring cable shields are grounded at the terminal block grounding bar.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":66852654415987,"sku":"BMXAMM0600","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/BMXAMI0410_Cocoai_18fbe299-ce28-4f0c-b63a-bdf055057824.jpg?v=1791872534","url":"https:\/\/www.dcssupplier.com\/products\/schneider-bmxamm0600-analog-i-o-modules","provider":"DcsSupplier Limited","version":"1.0","type":"link"}