{"product_id":"schneider-electric-bmxddm1602-discrete-input-module","title":"Schneider Electric BMXDDM1602 Discrete Input Module","description":"\u003cp\u003eThe \u003cstrong\u003eSchneider Electric BMXDDM1602\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eBMXDDM1602\u003c\/strong\u003e Discrete Input Module, operates as a dedicated hardware component for 24 V DC discrete signal acquisition within Modicon X80 control system architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eBMXDDM1602\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eStandard Manufacturer Origin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.115 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e103.7 mm x 32 mm x 86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e2.5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Inputs\u003c\/td\u003e\n\u003ctd\u003e16 discrete inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e24 V DC isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Logic\u003c\/td\u003e\n\u003ctd\u003ePositive logic (drain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse Time\u003c\/td\u003e\n\u003ctd\u003e4 ms typical, 7 ms maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Protection\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks and I\/O Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThe BMXDDM1602 module integrates seamlessly into Modicon X80 backplane configurations, supporting high-density discrete signal processing with 16 isolated channels conforming to IEC 60947-5-2 at 24 V DC. The module manages input currents of 3.5 mA per channel with an input impedance of 6800 ohms, ensuring stable signal acquisition across standard industrial networks. Firmware flash compatibility and hot-swappable replacement capabilities allow maintenance personnel to replace backup equipment without shutting down the entire rack bus infrastructure.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the module support hot-swappable installation in active racks?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the BMXDDM1602 supports hot-swappable replacement of backup equipment, permitting module extraction and insertion under power within compatible Modicon X80 backplanes.\u003c\/p\u003e\n\u003cp\u003eQ: What is the channel-to-bus dielectric strength specification?\u003c\/p\u003e\n\u003cp\u003eA: The insulation between each channel and the internal bus is rated at 1500 V for 1 minute.\u003c\/p\u003e\n\u003cp\u003eQ: How does the module handle sensor fault detection?\u003c\/p\u003e\n\u003cp\u003eA: The module incorporates voltage detection thresholds where input voltages below 14 V DC trigger a sensor fault state, while voltages above 18 V DC register as Sensor OK.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Mount the module onto a standard DIN rail or compatible Modicon X80 rack housing, ensuring proper physical alignment with the backplane bus connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Connect 2-wire or 3-wire sensors to the terminal blocks following the positive logic (drain) configuration. Ensure all signal cables maintain adequate separation from high-voltage power lines to mitigate electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding \u0026amp; Environment:\u003c\/strong\u003e Verify that the operating ambient temperature remains within 0 deg C to 60 deg C and that the installation site adheres to IP20 enclosure standards free from condensing humidity exceeding 95% at 55 deg C.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":66859144773747,"sku":"BMXDDI1602","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/BMXAMI0410_Cocoai_ebcaf38c-0272-40b0-84f6-1a3477350a3d.jpg?v=1791961611","url":"https:\/\/www.dcssupplier.com\/products\/schneider-electric-bmxddm1602-discrete-input-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}