{"product_id":"yokogawa-mx6-a-interface-module","title":"Yokogawa MX6*A Interface Module","description":"\u003cp\u003eConfigured for signal integration in CENTUM VP and CS 3000 control architectures, the \u003cstrong\u003eYokogawa MX6*A\u003c\/strong\u003e (\u003cstrong\u003eMX6*A\u003c\/strong\u003e Interface Module) provides direct physical\/electrical execution of analog and digital I\/O bridging between field instrumentation and the DCS controller.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eMX6*A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard MX100 series rack form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-10 deg C to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Capacity\u003c\/td\u003e\n\u003ctd\u003eAnalog and digital interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eYokogawa DCS Process Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART loop protocol:\u003c\/strong\u003e The MX6*A module functions as a primary interface for HART-capable field devices. It ensures that analog loops remain transparent to digital protocol overlays, enabling the CENTUM VP system to retrieve device diagnostics without affecting process variable integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity:\u003c\/strong\u003e The module serves as a high-speed data bridge for fieldbus segments, ensuring that deterministic data exchange intervals are maintained between the field level and the centralized control station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-channel isolation:\u003c\/strong\u003e The architecture incorporates robust galvanic isolation to separate field-side signal paths from the DCS backplane. This is mandatory to prevent the transmission of ground loops or induced electrical transients into the controller's main processing environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold junction compensation (CJC):\u003c\/strong\u003e The interface module provides precise signal conditioning, ensuring that thermal references remain stable even during high-density I\/O operation, which is mandatory to protect the measurement accuracy of connected thermocouple and RTD inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the MX6\u003ci\u003eA support live insertion (hot-swapping) within the MX100 rack? A: Hot-swapping is not supported for this module. The rack must be powered down to safely disconnect or install the MX6\u003c\/i\u003eA, as live insertion can cause power spikes that may damage the backplane communication controller or the module’s internal circuitry.\u003c\/p\u003e\n\u003cp\u003eQ: How should I verify signal health via the onboard indicators?\u003c\/p\u003e\n\u003cp\u003eA: The module features front-panel LED indicators. A steady-state illumination typically denotes active link status, while specific flash patterns indicate communication faults or I\/O threshold limit violations. Refer to the system-specific maintenance manual for the precise blink-code mapping for this module.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Secure the module firmly within the MX100 series rack. Ensure the locking tabs are fully engaged to guarantee optimal pin contact with the backplane bus, which is mandatory for maintaining the high-speed data transfer rates required by the CENTUM VP system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Terminate the rack chassis to the cabinet’s primary safety ground bus using a low-impedance conductor. Reliable grounding is mandatory to maintain the module's specified isolation performance and to minimize electromagnetic noise pickup from adjacent high-voltage components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Route field signals using shielded, twisted-pair cabling to maintain signal integrity. Maintain a minimum separation of 150 mm from all high-power AC output cables. Ensure that cable shields are grounded at the field entry point to prevent ground loops, which is mandatory to maintain the module's precision and stability.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":45188884496499,"sku":"MX6*A","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-08_15-31-57.png?v=1783500554","url":"https:\/\/www.dcssupplier.com\/products\/yokogawa-mx6-a-interface-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}