{"product_id":"yokogawa-nc2-c-network-communication-module","title":"Yokogawa NC2*C Network Communication Module","description":"\u003cp\u003eConfigured for high-reliability data exchange in industrial control architectures, the \u003cstrong\u003eYokogawa NC2*C\u003c\/strong\u003e (\u003cstrong\u003eNC2*C\u003c\/strong\u003e Network Communication Module) provides direct physical\/electrical execution of field-to-controller signal bridging, data packet routing, and network protocol management.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNC2*C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSystem dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard industrial module form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem backplane dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC Input\/Output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eYokogawa DCS Process Control Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-20 mA HART loop protocol:\u003c\/strong\u003e The NC2*C serves as a node for HART-capable field device communication. It ensures that digital status overlays and diagnostic data are transparently passed through the network, allowing DCS controllers to monitor field instrument health without signal degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOUNDATION Fieldbus \/ Profibus PA connectivity:\u003c\/strong\u003e The module operates as a critical gateway for fieldbus segments. It maintains the timing precision and bus arbitration required for deterministic communication, ensuring that process variables are synchronized across the distributed control system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel-to-channel isolation:\u003c\/strong\u003e The module features galvanic isolation across its communication ports. This is mandatory to decouple the field-side network from the centralized controller, preventing localized voltage surges or ground faults from compromising system-wide data integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold junction compensation (CJC):\u003c\/strong\u003e The NC2*C is engineered for high-temperature resilience (-40 deg C to +70 deg C); its internal thermal management ensures that the module does not contribute to localized drift when mounted in proximity to sensitive analog cards, preserving the accuracy of system-wide reference measurements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the NC2*C support redundant network topologies?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module is designed to integrate into redundant network loops. It supports automatic fail-over signaling, allowing the control system to redirect communication traffic to a secondary path if the primary link experiences high latency or physical disconnection.\u003c\/p\u003e\n\u003cp\u003eQ: Is this module field-configurable for different industrial protocols?\u003c\/p\u003e\n\u003cp\u003eA: The NC2*C is optimized for Yokogawa system protocols. Ensure that the module's firmware is matched to the specific host control system requirements, as protocol handling and baud rate synchronization are pre-defined during the configuration phase of the network setup.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Secure the module within the designated control rack or DIN-rail enclosure. Ensure that the mechanical connections are tight, which is mandatory to minimize vibration and maintain the physical continuity of the network trunk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Terminate the NC2*C chassis ground to the cabinet's primary safety earth bus. A low-impedance ground reference is mandatory to ensure the efficacy of the module’s internal surge suppression and to protect the communication transceivers from electrostatic discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Utilize shielded, twisted-pair cabling for all network trunks. Maintain at least 150 mm of separation from high-voltage AC cabling to avoid electromagnetic interference, which is mandatory to maintain signal integrity and prevent packet re-transmission errors on the communication bus.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":45188886003827,"sku":"NC2*C","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/4348\/2227\/files\/screenshot_2026-07-08_15-33-05.png?v=1783500346","url":"https:\/\/www.dcssupplier.com\/products\/yokogawa-nc2-c-network-communication-module","provider":"DcsSupplier Limited","version":"1.0","type":"link"}