ABB PPD113 B01-25-111000 3BHE023784R2530 Programmable Logic Controllers

The ABB PPD113 B01-25-111000 3BHE023784R2530, also cataloged as the PP D113 AC 800PEC Controller, operates as a dedicated hardware component for high-performance processing and system communication within AC 800PEC control networks.

Suffix Breakdown & Model Matrix

Hardware Specifications

Backplane Bus Communication Velocity and Firmware Compatibility

• The controller coordinates high-speed fieldbus transfers across CEX2-Bus RS422 and Anybus/Modbus TCP channels, maintaining synchronized process execution across Profinet / EtherNet/IP deterministic networks. Fiber-optic channels (UF D128) provide low-latency optical data transmission between remote PEC80/AC 800PEC nodes.
• Onboard microcode firmware enforces system-wide flash compatibility across AC 800PEC processor architectures. Operational parameters and option-card configurations adapt dynamically during system startup, ensuring deterministic control updates without processing bottlenecks.

Frequently Asked Questions

Q: What communication expansion options are populated in the ANYIO slots of this controller configuration?

A: Slot ANYIO-1 (U4) is populated with a CEX2-Bus RS422 interface, while Slot ANYIO-2 (U5) contains an Anybus/Modbus TCP network module.

Q: How many fiber optic option modules are installed in the expansion slots of this unit?

A: Slots Opt. Mod.1 through Opt. Mod.3 (U7, U8, U9) are fitted with UF D128 fiber optic modules, while slots U10, U11, and U12 remain empty.

Field Installation Guidelines

• Shut down all main AC/DC power sources supplying the control cabinet and verify zero-voltage state before installing or servicing the controller unit.
• Wear an ESD grounding wrist strap connected to an unpainted metal surface of the cabinet enclosure during handling.
• Mount the module vertically on designated mounting rails, securing all retaining hardware to establish firm chassis earth continuity.
• Ensure optical fiber cables connected to the UF D128 modules are routed with clean dust caps removed immediately prior to insertion, adhering strictly to minimum bend radius limits.