Allen-Bradley 2090-XXNPMF-16S03 Kinetix Servo Motor Power Cable

The 2090-XXNPMF-16S03 is a factory-assembled, 3-meter standard motor power cable engineered for Allen-Bradley Kinetix motion control systems. Constructed with 16 AWG conductors, this non-flex power cable features a straight threaded DIN (M23) connector on the motor end and flying leads on the drive end, establishing reliable power delivery between Kinetix servo drives and compatible servo motors.

Cable Construction & Signal Transmission

Designed strictly for non-flex (static) installation applications, the cable accommodates bending or reforming during initial routing but must not be used in continuous-flex motion tracks. Its 16 AWG wire gauge provides optimized current-carrying capability for low-to-mid power servo motors while maintaining low conductor resistance and proper voltage drop performance across its 3 m length.

The motor-side termination features a rugged threaded M23 DIN connector with straight orientation, ensuring positive mechanical locking, strain relief, and IP-rated environmental sealing against industrial contaminants. The drive side consists of pre-trimmed flying leads designed for direct wiring into the removable terminal blocks or power headers of compatible Kinetix servo drives.

Shielding & System Compatibility

The cable incorporates overall shielding with a grounded braid to mitigate electromagnetic interference (EMI) generated by high-frequency drive switching. Proper termination of the cable shield at the drive chassis ground ensures low noise emission and guards sensitive feedback and control signals against cross-talk.

Frequently Asked Questions

Q: Can the 2090-XXNPMF-16S03 cable be used in continuous-motion cable carriers? A: No, the 2090-XXNPMF-16S03 is a standard non-flex cable designed only for fixed, static routing; continuous-flex applications require continuous-flex rated cables such as the 2090-CPWM4DF series.

Q: How should the shield wire or exposed braid of the 2090-XXNPMF-16S03 be terminated? A: The exposed cable shield braid must be grounded to the drive chassis using the provided power cable clamp or ground terminal to ensure effective noise suppression and safe operation.