Allen-Bradley 2711-T6C15L1 PanelView 600 Terminal

The Allen-Bradley 2711-T6C15L1 serves as the primary 2711-T6C15 PanelView Standard Operator Interface utilized to execute real-time graphical visualization and interactive process control across ControlNet automation networks. Operating on a 24 VDC nominal power supply, this visualization terminal renders machine telemetry on a 5-inch color Active Matrix TFT screen while processing touch cell inputs to update memory tags across connected programmable logic controllers.

Suffix Breakdown & Model Matrix

The catalog number 2711-T6C15L1 designates specific hardware, display, power, and network interface options within the Allen-Bradley PanelView 600 product line:

Hardware Specifications

Backplane Bus Communication Velocity & I/O Density Scaling

Engineered for deterministic network integration, the 2711-T6C15L1 utilizes its embedded ControlNet port to execute high-speed scheduled and unscheduled I/O messaging over RG6 coaxial media. The onboard protocol stack supports symbolic CIP addressing when communicating directly with ControlLogix architectures, enabling low-latency tag updates and alarm status propagation across multi-node networks. The terminal also provides redundant cabling support and an auxiliary Network Access Port (NAP) for localized network configuration without interrupting primary ControlNet bus transmission velocity.

Frequently Asked Questions

Q: What power source is required to operate the 2711-T6C15L1 terminal?

A: The terminal requires a 24 VDC nominal input power source operating within an allowable DC voltage range of 18 to 32 VDC, drawing a maximum of 1.0 A.

Q: Can the 2711-T6C15L1 connect to multiple controllers over ControlNet?

A: Yes. The integrated ControlNet communication port supports connection to single or multiple controllers across ControlNet platforms using CIP symbolic addressing over scheduled and unscheduled bandwidth.

Field Installation Guidelines

1. Disconnect all electrical power sources supplying the control cabinet and power leads before creating panel cutouts or mounting the HMI terminal.
2. Prepare a clean panel cutout matching the standard PanelView 600 mounting dimensions, removing all metal burrs from the enclosure door edges.
3. Inspect the continuous sealing gasket around the rear bezel to ensure proper seating prior to inserting the terminal into the panel opening.
4. Insert the unit into the cutout and tighten all mounting clips in an alternating sequence to achieve even gasket compression for NEMA-rated ingress protection.
5. Connect RG6 coaxial cable terminations to the ControlNet BNC port and secure a heavy-gauge grounding strap from the chassis grounding stud to the main panel earth bus.