Allen-Bradley 2711P-RL10C2 Display Backlight Assembly

The Allen-Bradley 2711P-RL10C2 is an official replacement color backlight kit designed specifically for Series B and Series C 10-inch display modules used in PanelView Plus and PanelView Plus CE 1000 operator terminals. This component allows maintenance personnel to restore dim, faded, or failed LCD screens efficiently, avoiding the need for a complete replacement of the underlying display unit.

Functional Overview and Compatibility

Engineered as a direct field-replacement part, this backlight kit matches the mechanical and electrical specifications required by legacy 1000 Series B and C terminals. Utilizing genuine replacement lamps ensures uniform screen illumination and protects the internal inverter circuitry from compatibility issues associated with generic alternatives.

Technical Specifications

Preparation and ESD Precautions

Before performing any maintenance inside the operator terminal, completely disconnect all incoming AC or DC power to prevent electrical shock or damage to internal logic components. Because display electronics are sensitive to static electricity, technicians must wear a properly grounded electrostatic discharge (ESD) wristband and work on a clean, static-safe surface.

Replacement Steps

1. Place the display module face down on a soft, non-abrasive surface to protect the touchscreen and bezel.
2. Remove the rear enclosure housing to access the internal display chassis and inverter board connections.
3. Carefully disconnect the old backlight cable from its header on the circuit board.
4. Slide out the spent lamp assembly and insert the 2711P-RL10C2 replacement kit, ensuring proper physical seating.
5. Reconnect the power lead securely, reattach the enclosure housing, and verify operation before returning the terminal to service.

Frequently Asked Questions

Q: Which terminal series are compatible with the 2711P-RL10C2 backlight kit?

A: The 2711P-RL10C2 is engineered specifically for Series B and Series C 10-inch display modules used in PanelView Plus and PanelView Plus CE 1000 operator terminals.

Q: How should the old fluorescent backlight component be disposed of?

A: Spent CCFL backlight assemblies contain trace amounts of mercury. Dispose of or recycle the removed component in accordance with local environmental and hazardous waste regulations.