Allen-Bradley 2711P-RW2 PanelView Plus Flash Memory Card

Configured for non-volatile application storage and firmware execution within industrial operator terminals, the Allen-Bradley 2711P-RW2, also cataloged as the 2711PRW2 128 MB internal CompactFlash card, provides direct physical and electrical execution for managing runtime projects across PanelView Plus hardware platforms.

Suffix Breakdown & Model Matrix

Hardware Specifications

Profinet / EtherNet/IP Deterministic Networks

The Allen-Bradley 2711P-RW2 utilizes high-speed backplane bus communication velocity and firmware flash compatibility to process deterministic application files, historical data logs, and runtime configurations without transmission latency. Solid-state flash architecture protects stored operating parameters against heavy plant floor electromagnetic interference, mechanical vibration, and thermal fluctuations.

Frequently Asked Questions

Q: What is the storage capacity of the Allen-Bradley 2711P-RW2 memory card?

A: The card provides 128 megabytes of internal CompactFlash memory for application and firmware storage.

Q: Can the memory card be installed while the PanelView Plus terminal is powered on?

A: No, operating power to the terminal must be fully isolated and locked out before inserting or removing the CompactFlash card to prevent bus pin damage or data corruption.

Q: What operator interface series is compatible with this flash module?

A: The 2711P-RW2 is engineered specifically for integration within compatible Allen-Bradley PanelView Plus terminal internal slots.

Field Installation Guidelines

Ensure that power to the PanelView Plus terminal is completely isolated and locked out before handling the memory card. Open the rear enclosure compartment, align the 2711P-RW2 CompactFlash card with the internal guide rails, and push firmly into the socket until fully seated. Verify that the terminal recognizes the memory module upon restoring system power.