Allen-Bradley 2711P-T15C6A6 PanelView Plus 1500 Operator Interface Terminals

The Allen-Bradley 2711P-T15C6A6, also cataloged as the 2711P-T15C6A6 Operator Interface Terminal, operates as a dedicated hardware component for human-machine visualization and control execution within EtherNet/IP and ControlLogix automation network platforms.

Hardware Specifications

Deterministic Network Connectivity and Firmware Scaling

The terminal interfaces directly with programmable logic controllers via dedicated communication ports to exchange real-time tag data and alarm states. Flash memory capacity allows execution of complex runtime applications while maintaining deterministic bus performance across industrial control backplanes. High-density display rendering circuits process color pixel coordinates without introducing latency to key-press input scanning cycles. Firmware compatibility routines ensure consistent tag resolution across multi-node control architectures during online runtime updates.

Frequently Asked Questions

Q: What is the input voltage range required to power the 2711P-T15C6A6?

A: The terminal requires a nominal AC input power supply operating between 100 VAC and 240 VAC at an input line frequency of 50 Hz to 60 Hz.

Q: Is the touch screen panel field-replaceable or hot-swappable while energized?

A: No, power must be completely disconnected from the terminal prior to opening panel enclosures or servicing internal components.

Q: How is memory managed for application graphics and historical trend data?

A: The 128 MB onboard memory space is partitioned between non-volatile flash storage for system runtime files and volatile memory dedicated to active display buffering and execution.

Field Installation Guidelines

• Panel Mounting and Gasket Sealing: Insert the terminal into a pre-cut enclosure opening using all supplied mounting lever clips to achieve proper IP/NEMA environmental sealing ratings.
• AC Wiring and Earthing: Connect AC line wiring to designated screw terminals and secure a low-impedance copper ground wire directly to the protective earth (PE) lug on the rear chassis.
• Conduit and Signal Separation: Route AC power conductors in separate metallic conduit from low-voltage communication lines to suppress industrial high-frequency noise interference.