GE A350-2900-T296/04 Servo Memory Board

Configured for memory expansion and parameter execution in GE servo control platforms, the GE A350-2900-T296/04 (A350-2900-T296 Servo Add-On Board) provides direct physical/electrical execution. This plug-in memory card mounts directly onto the host mainboard to store motion control parameters, axis positioning profiles, and operating system logic. It handles non-volatile parameter storage to enable high-speed data retrieval during real-time servo loop execution.

Hardware Specifications

Backplane Bus Communication Velocity & Firmware Flash Compatibility

The GE A350-2900-T296/04 memory board interfaces directly with the host controller bus architecture to support maximum backplane bus communication velocity during intensive motion sweeps. Its integrated memory array maintains firmware flash compatibility across compatible GE servo module series, allowing high-speed parameter access and firmware execution without introducing bus arbitration delays. The low-latency data interface ensures zero-wait-state access to position control algorithms during high-dynamic axis motion cycles.

Frequently Asked Questions

Q: What is the primary operational function of the A350-2900-T296/04 module?

A: The card functions as an add-on non-volatile memory expansion board designed to store axis parameters, system firmware, and configuration data for GE servo drives.

Q: Can the A350-2900-T296/04 memory card be installed while the host servo unit is powered?

A: No. Control system power must be completely de-energized prior to installing or removing the daughterboard to prevent electrostatic damage or memory corruption.

Q: How is the A350-2900-T296/04 memory board physically secured to the main module?

A: The board mounts directly onto designated socket headers on the host servo motherboard and is secured via board-level standoff clips to resist industrial vibration.

Field Installation Guidelines

1. Power Isolation: Turn off main supply power and 24 VDC control power to the host servo module before opening the housing.
2. ESD Protection: Wear a grounded anti-static wrist strap connected to cabinet earth ground to prevent electrostatic discharge damage to memory ICs.
3. Board Alignment: Align the daughterboard connectors with the mating pins on the host mainboard receptacle.
4. Mechanical Seating: Press evenly on the edges of the A350-2900-T296/04 board until the connectors fully engage and mechanical retention snaps lock the board in place.
5. Reassembly & Verification: Close the host module enclosure, restore control power, and verify via system diagnostic LEDs or software that the memory expansion card is recognized without fault codes.