GE DS200LPPAG1A Drive Board Line Protection Board

The GE DS200LPPAG1A, also cataloged as the DS200LPPAG1A line protection board, operates as a dedicated hardware component for line protection and signal interfacing within Mark V drive systems.

Suffix Breakdown & Model Matrix

Hardware Specifications

Backplane Communication Velocity and Firmware Flash Compatibility

The module integrates standardized backplane bus communication channels designed for Mark V drive control frameworks, maintaining deterministic signal transfer across system nodes. Hardware configuration relies on physical jumper settings and dual terminal block layouts, providing direct physical control over line protection thresholds. Firmware flash compatibility and jumper placement must be verified against system documentation prior to initial energization to prevent configuration mismatch errors during runtime execution.

Frequently Asked Questions

Q: Can the board configuration jumpers be modified while the drive system is energized?

A: No, all jumper position changes must be performed while the system is fully de-energized to prevent electrical shock and logic state corruption.

Q: What precautions are necessary for terminal block wiring connections?

A: Field wiring connected to the 3-terminal blocks must be securely tightened to specified torque limits and shielded to prevent common-mode electrical noise interference.

Field Installation Guidelines

Ensure proper electrostatic discharge (ESD) wrist strap grounding prior to handling or installing the printed circuit board within the control cabinet. Align the board edges correctly with the designated rack slots, inserting it smoothly until the mechanical connectors are fully seated. Inspect all terminal blocks and jumper configurations to ensure correct physical setup before restoring system power.