GE DS6800CCID1D1D/DS6815PCDP1B1A Interface Modules

Configured for command processing and power conversion driving in GE Drive Systems 6800 networks, the General Electric DS6800CCID1D1D/DS6815PCDP1B1A (DS6800CCID1D1D/DS6815PCDP1B1A Interface Module Set) provides direct physical/electrical execution.

Hardware Specifications

Industrial Control & Backplane Communication Properties

As a dual-module interface assembly within GE Drive Systems 6800 drive cabinets, the DS6800CCID1D1D/DS6815PCDP1B1A manages signal routing and gate execution:

• Profinet / EtherNet/IP Deterministic Networks: Routes velocity commands, position targets, and real-time drive diagnostics across deterministic network interfaces to maintain precise drive axis synchronization.
• Backplane Bus Communication Velocity: Exchanges command payloads and gate drive triggers across dedicated chassis backplane slots without latency accumulation during dynamic motor load transitions.
• Firmware Flash Compatibility: On-board memory ICs preserve drive configuration parameters and gate-drive protection thresholds across host system controller firmware updates.

Frequently Asked Questions

Q: How are the control functions split between the two modules in this set?

A: The DS6800CCID1D1D module handles command processing and host communications, while the DS6815PCDP1B1A module manages power conversion routines and gate drive signal generation.

Q: How do these modules interface mechanically within the drive chassis?

A: The two boards interconnect through high-density ribbon cables and power connectors, seating directly into dedicated card slots within the GE Drive Systems 6800 rack.

Q: What onboard diagnostic features are available on these boards?

A: Both boards feature onboard diagnostic status LEDs that provide visual indication for hardware readiness, communication states, and fault conditions.

Field Installation Guidelines

Proper mechanical mounting and wiring practices ensure reliable operation within drive cabinets:

• Chassis Slot Insertion: Align both PCBs with their designated card guides inside the GE 6800 series cabinet. Slide each board evenly into its slot to engage the backplane pins without bending connector terminals.
• Ribbon and Power Cable Interconnection: Connect all high-density ribbon cables and power interconnect links firmly between the DS6800CCID1D1D and DS6815PCDP1B1A modules before applying system power.
• Grounding and EMI Shielding: Fasten board retaining screws securely to complete the chassis grounding path. Keep low-voltage control communication lines separated from high-voltage gate drive and power output cables to minimize electromagnetic interference.