GE IC600BF841 Analog Input Module

Configured for analog signal processing in Series Six PLC architectures, the GE IC600BF841 (IC600BF841 Analog Input Module) provides direct physical/electrical execution.

Hardware Specifications

Backplane Bus Communication Velocity and Firmware Compatibility

• The module conditions and digitizes 4 analog voltage channels (0-10 VDC) for high-speed transmission across the Series Six backplane bus. Analog-to-digital conversions are synchronized with the central processor CPU scan cycle to maintain deterministic loop updates.
• Microcode protocols on the module manage signal buffering and scaling directly on the board. Operational parameters interface seamlessly with Series Six CPU firmware, delivering continuous 0-10 VDC data conversion without causing backplane communication bottlenecks.

Frequently Asked Questions

Q: What input voltage signal range is supported by this analog module?

A: The module accepts 0-10 VDC analog input signals across 4 dedicated input channels.

Q: Can this module be removed or inserted into the Series Six rack while power is applied?

A: No, hot-swapping is strictly prohibited. Power to the rack chassis must be turned off before removing or installing the module to prevent electrical damage to the backplane connectors.

Field Installation Guidelines

• Ensure the main PLC power supply is turned off and locked out prior to inserting the board into the Series Six rack.
• Handle the circuit board using an ESD grounding wrist strap attached to an unpainted chassis earth point.
• Route 0-10 VDC analog input wires in twisted, shielded pairs, ensuring shields are grounded at a single end to prevent ground loop noise.
• Maintain physical separation between 0-10 VDC analog signal cables and high-voltage AC power lines within the panel wiring ducts.